I am cleaning the garage. Make me an offer on anything you see in the photos. Remember shipping too.

(Edited 11/25 due to sales)

Here:











Plates are for T25 downpipe. $20+ shipping (Still have two left)
2.5" SS flex pipes. $35+ (still have 3 left)
two hole plates are for stock cat. $2+ (still have 3 left)
2.5" to 2" adapters $3+ (still have 3 left)
All alternators work good. $30+ (One sold)
one dist is good for core only. $40+
SOHC cam gear AEM with mandrel. $45+ (SOLD)
two fish tank valves for MAP bypass. $5+
2.5" Aluminzed U-bend good for downpipe. $10+ (both SOLD)
1.5" 90 deg good for wastegate. $3+ (still have 5 left)
Exhaust gasket new in plastic $5+
Main relay good for backup, but touchy in hot weather. $5+
8 stock injectors. $20+ set of 4.
stock radio works but not great. $free+ (SOLD)
2.5 inch high flow cat, not drop in. $50+
stock K&N drop-in filter, cleaned and oiled. $20+ (waiting on money)
Stock TB no TPS. $10+
Fuel rail $10+ (SOLD)
3.5 feet of an4 SS hose. $5+

~3 feet of 1.5" bendable exhaust hose. $15+
Two door trim pieces. $5+ for both
4 new in box NGK spark plugs. One step colder for turbo or NOS. BCPR7E-11 $4+ for the set of 4.


E-mail me for more details randygaz@comcast.net

Thanks,
Randy


Modified by RGAZ at 7:25 AM 11/26/2003

 

What do you mean by aem cam gear with mandrel.. Also what do you want for all the mandrel bend piping.. Thanks

 

is $10 for ONE or TWO u bends? How much for shipping to VA (22193) for the U bends? Thanks

 

Sorry guys, I sold the two u-bends and the AEM cam gear.

What I meant about the mandrel is that you can put the gear on the mandrel and then on your drill and then verify it is "round" or not bent. i made the mandrel so i could make sure it was straight.

Randy

 

You dont have that fuel line that was attachted to the fuel rail do you? the one goin from the fuelfilter tothe fuel rail?

Matt