I allready have the GC's on the car right know and it seems like everyone is looking for the same springs as me in the race springs thread and I was curious of where online I could purchase seperate sets of springs for the front and rear, I allready searched and any help would be greatly appriciated.

thanks
matt

 

https://honda-tech.com/zerothread?id=553330
http://www.ground-control.com
https://honda-tech.com/zero...14563

 

RJ thank you very much for the help my last question is for my 94 civic hatch with all the tower type of bars a welded in custom 8pt being installed as we speak on tokico 5 ways with no front bar and 22mm rear bar running on lenso vpd's 235x45x13's should I start out with 6" springs or 7" springs thanks

matt

 

if you're driving on the street... 7" springs

buy your springs from KingRat his service kicks alot of ***

 

RJ thanks again you have been very helpful what if you have time what are the main diffirences between a 6" and a 7" spring (I know 1") the car is 95% autox.
thanks again I am learning every day

later
matt

 

with the shorter spring you might not be able to get the car high enough for daily driving...

 

RJ thank you again very much

later
matt