Kit doesn't look as good as the beaks but if it does, I'm game. Thanks everyone!! BTW this is going to be used with a JDM ITR rear swaybar...

 

i beat on my car forever, no problems w/ my BSQ kit, my car got stolen, it was flipped i think twice, the exhaust was busted to hell, but the rear sway bar was still in place, lol

 

I don't think it's possible unless you make some major install mistakes.

 

I had the kit with the ITB bar for almost 3 years - no problem.
To clarify- Brett refered to his kit as mounting kit
BEAK called his reinforcement kit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mase &raquo;</TD></TR><TR><TD CLASS="quote">i beat on my car forever, no problems w/ my BSQ kit, my car got stolen, it was flipped i think twice, the exhaust was busted to hell, but the rear sway bar was still in place, lol </TD></TR></TABLE>

sales line of the year

lol

 

There is a thread in the EG forum showing an ITR bar w/ Beaks kit, and it ripped out a whole piece of the subframe where the Beaks kit was attached.

 

one work...

EEEK!

 

O shiet....K, I'm gonna get a BSQ.... Thanks guys.

 

i beat on my car everyday, and the BSQ kit is still there!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">There is a thread in the EG forum showing an ITR bar w/ Beaks kit, and it ripped out a whole piece of the subframe where the Beaks kit was attached. </TD></TR></TABLE>


methinks that car had some cancer problems.....

My BSQ kit is awesome.

 

i did, but evil drew is an idiot.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by audi &raquo;</TD></TR><TR><TD CLASS="quote">i did, but evil drew is an idiot.</TD></TR></TABLE>

bye bye!

 

I beat on mine and no problems. I think the Beaks is a little better than BSQ but they should both work great!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">There is a thread in the EG forum showing an ITR bar w/ Beaks kit, and it ripped out a whole piece of the subframe where the Beaks kit was attached. </TD></TR></TABLE>

geez....

I thought the Beaks kit was quality.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by audi &raquo;</TD></TR><TR><TD CLASS="quote">i did, but evil drew is an idiot.</TD></TR></TABLE>


This Evil Drew guy is going to be pissed

 

whatever aftermarket bar you run, I'd highly suggest reenforcement of some kind. Wouldn't want you to end up with this:



a little closer up... beautiful huh?:


after running around with it like that for a year I finaly took it to a body shop and had it all welded. the other side was starting to crack too so both sides were patched:




Because I never want it to happen again I decided to skip the kits and go for the most well thought out set up out there: the Comptech. this setup, while eliminating understeer also gives the rear a solidness that makes it more predictable than before inspiring confidence on those spirited runs.

 

nice repair on the subframe tear. at least youre back on the road again.