Is the Ultimate all motor crx still around, or competing for that matter, How come three years later nobody has been able to match or beat this time....in Canada.

Just wondering, does anybody know about these guys.

Are they the fastest and quickest in Canada....

 

last i heard the crx is retired and he has that motor in an integra. you can see it at
ultimate-racing.com.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Matty &raquo;</TD></TR><TR><TD CLASS="quote">last i heard the crx is retired and he has that motor in an integra. you can see it at
ultimate-racing.com.</TD></TR></TABLE>

I found where the header from the Ultimate-racing car went....

https://honda-tech.com/zerothread?id=673317

 

Does Ulitimate hold the Canadian all-motor record????? et and mph

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MGD &raquo;</TD></TR><TR><TD CLASS="quote">Does Ulitimate hold the Canadian all-motor record????? et and mph</TD></TR></TABLE>

not sure about the MPH but still holds the ET for sure.

 

Canadas fastest All Motor Honda Retired 3 years ago.





Canadas quickest active all motor honda. 11.3 @ 117





Canada fastes active all motor honda 11.5 @ 120 mph



Canadas most excpensive all motor honda 11.51 @ 115mph





Canadas coolest all motor honda 11.98 @ 11x.xx mph




All motor h22 12.0 @ 111 kwik93si on h-t




this is mine, 12.104 @ 110mph





Another excpensive all motor civic. seen 12.8 @ 108. heard 12.10 @ 110 so not sure on the time.



I dont have any info on this CRX, I think it has a stock b16 and runs somwhere in the 13's (looks nice imo)
















Modified by shant at 6:33 AM 11/12/2003

 

Representing the Canadian scene....Nice pics!!!

 

i think he is too busy to race, but really he never ran those times in canada so they don't count as a canadian record, but he is/was the fastest

 

I saw that ultimate crx running 11.20s at st thomas like 3 years ago. I was up with some domestic friends at the time. I was like wtf this guy is knocking on 10s
Of course back then there were only a handful of cars going that quick.

 

ya that wasn't at an event and it wasn't weighed but for all things considered it was/is the fastest

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMotorMark &raquo;</TD></TR><TR><TD CLASS="quote">ya that wasn't at an event and it wasn't weighed but for all things considered it was/is the fastest</TD></TR></TABLE>

yea I remember I went down to st. thomas the day before they went to NJ they were running 11.2 - 11.3 all day..

 

nice pics of the canadian cars shant!! i think all motor will be the best class next year (it was this year too) kind of makes me want to switch!

 

I'll be representin the Winnipeg crew soon enough. I dunno what you guys have out east / west, but there isn't too really fast hondas out here. I should build a race car....

 

I was at the first event they ever ran at in the states. They turned alot of heads that day.. Awesome bunch of guy's. I actually drove up there to have some machine work done at Leitner and Bush.

 

added more pics

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shant &raquo;</TD></TR><TR><TD CLASS="quote">added more pics
</TD></TR></TABLE>

good stuff, Kedimoto representing....

 

To answer the original question, the front end on that car recently gotsold to an H-T member named Sircrxracer or something like that. The motor is in the integra (not in the same form though) and rumour has in that Johnson cut the body up, but someone else recently showed me somepictures that look exactly the same as that car. Johnson was the quickest/fastest are far as a Canadian car that rant the time, but as allmotormark pointed out, he never ran them at a sanctioned Canadian event. Also, from what I see anymore Johnson is out of the drag racing game, except to rent the track to test out his new turbo kits. The guy makes some siiick kits for the EVO, WRX, and RS-X.

Clayton

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -KangaRod- &raquo;</TD></TR><TR><TD CLASS="quote">I'll be representin the Winnipeg crew soon enough. I dunno what you guys have out east / west, but there isn't too really fast hondas out here. I should build a race car....</TD></TR></TABLE> There should be a few decently quick all motor hondas here.

 

Up, for a damn good thread and pics!!!!!!

 

some nice pics. good shots man. that black hatch looks good

 

i especially like the pic of the "all motor" del sol that has N.o.S. in it...lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -KangaRod- &raquo;</TD></TR><TR><TD CLASS="quote">I'll be representin the Winnipeg crew soon enough. I dunno what you guys have out east / west, but there isn't too really fast hondas out here. I should build a race car....</TD></TR></TABLE>
well i will see if i can get my car ready in time and i will be more then happy to come down and try give you some compantion.. in sask thare are probley only a handfull of imports, turbo or not that can run a 12sec 1320.. i will be trying to show what the oll ls/vtec can do

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMotorMark &raquo;</TD></TR><TR><TD CLASS="quote">i especially like the pic of the "all motor" del sol that has N.o.S. in it...lol</TD></TR></TABLE>

sory I dident know it was a nitrous car, I always thought it was all motor.

BTW Ive been looking for pictures of Kens (KS-R on h-t) tube chassis EF civic, It would be nice if his pictures were in this post.

also (allmotor7642) Scotts civic is nice but i dont have any pictures of it.

 

not your fault ,

he has "all motor" across his windshield

he says he only uses it for the streets....lol too bad he never races

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone &raquo;</TD></TR><TR><TD CLASS="quote">I actually drove up there to have some machine work done at Leitner and Bush.</TD></TR></TABLE>

my apologies ahh I shouldn't say that they have done good work for me before.