I need help from anyone with a stock GSR exhaust cam laying around
Thread Starter
New User
Joined: May 2001
Posts: 1,088
Likes: 0
From: San Antonio, TX, USA
I need help from anyone with a stock GSR exhaust cam laying around
I bought an ITR exhaust cam. I've never seen or measure the lift on a cam before.
Here's what I did. I placed a piece of paper between the lobes and put a mark with a pencil. Then I used my scale to measure. It measures about 9.3 mm - 9.5 mm. I am measuring perpendicular to the cam. Am I measuring right? I know I could tell once I remove my GSR cam, but I don't want to do that if i don't have the right cam.
Could someone help me out?
Here's what I did. I placed a piece of paper between the lobes and put a mark with a pencil. Then I used my scale to measure. It measures about 9.3 mm - 9.5 mm. I am measuring perpendicular to the cam. Am I measuring right? I know I could tell once I remove my GSR cam, but I don't want to do that if i don't have the right cam.
Could someone help me out?
Honda-Tech Member
Joined: Jan 2000
Posts: 1,287
Likes: 1
From: Bay Area, CA
Re: I need help from anyone with a stock GSR exhaust cam laying around (1fastGSR)
Thread
Thread Starter
Forum
Replies
Last Post
pickieman
Acura Integra
1
Dec 18, 2003 05:35 AM