FS:JE pistons for b18c1 *pics*
Trending Topics
Member
Joined: Oct 2002
Posts: 3,279
Likes: 0
From: Secret Tweaker Pad
Re: FS:JE pistons for b18c1 *pics* (GPoodle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GPoodle »</TD></TR><TR><TD CLASS="quote">He said they're B18 stock bore 
</TD></TR></TABLE>
You can still use them in a b16, they are the same bore. Calculate compression here http://www.c-speedracing.com/h...c.php
</TD></TR></TABLE>You can still use them in a b16, they are the same bore. Calculate compression here http://www.c-speedracing.com/h...c.php
Thread Starter
Joined: Dec 2001
Posts: 1,011
Likes: 1
From: somewhere in US
Re: FS:JE pistons for b18c1 *pics* (Jdm_Rice_Monster)
well the person that build my block first bore one of the cylinder walls a little too much so i had to get a bigger bore which he paid for evrything then cuz he **** up by being lazy and not send it out to the machine shop cuz it was too busy at the time
Honda-Tech Member
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Re: FS:JE pistons for b18c1 *pics* (GPoodle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GPoodle »</TD></TR><TR><TD CLASS="quote">He said they're B18 stock bore </TD></TR></TABLE>
Wow you're good , B18C = 81mm bore = B16A, shorter stroke and a PR3 cylinder head is going to drop the C/R a bit more too... You're looking at ~8.80:1 which I would consider a little low (none the less they'd still work just fine in a B16)... ^^^To The Top^^^ since I had something to say...
</TD></TR></TABLE>Wow you're good
, B18C = 81mm bore = B16A, shorter stroke and a PR3 cylinder head is going to drop the C/R a bit more too... You're looking at ~8.80:1 which I would consider a little low (none the less they'd still work just fine in a B16)... ^^^To The Top^^^ since I had something to say...