Well I finally got a day off work to go dyno tune, well sort of. I call up EIP Tuning and ask them for an hour of dyno time. "Well our tuners not here.". Right, but I'm going to be tuning myself. "Oh ok sure come one down, be here at 2pm". Cool.

So on the way down, the main road I take to get there Rt.26 is closed. Oh great. So I go a back way and eventually make it there. I wait around for a while as they take my car back and strap it down. They finally come out front and tell me to come back. Guy hands me the controller, shows my how to switch between View Chart and Make Run and says good luck.

So I make my first run, get out of the car and walk over to the computer and plot the axis on the chart. WTF? Where's the A/F. So I ask Ian... "Aww sorry man our tuning tech has the sniffer in his truck and he's not here today." You've got to be kidding me. So I was like **** it I'll just do 3 pulls and figure out VTEC.

So I do the first run at 2,000rpm, set the 2nd run at like 8,900rpm and then plot both of them. They crossed at 5,000 perfectly. So I set VTEC @ 5,000 and make a pull.

Wow, not bad 154whp and 106wtq. Not bad for a stock internal untouched B16A2.

1999 Civic Si
AEM, King Motorsports TB, Skunk2 IM, JDM ITR 4-1, Carsound, Skunk2 exhaust, B&M FPR set at 40psi base, UR Ultra R crank pulley & Ultra A alt pulley, Kenji chipped P28.

Field's controller is installed with VTEC set @ 5,000rpm, but fuel is set @ 0 correction acroos the board becaue no tuning was done or could be done. FPR was untouched @ 40psi.

I was impressed for just bolt-on's on a 1999 Si. Skunk2 Cam gears are going on soon and then it's down to SC for a weekend of tuning and beer @ the old shed w/ Jack.

Flame away.

P.S. I don't feel like scanning and hosting a dyno chart. I'll have another write up and chart after tuning.

 

nope, not impressed...

 

i got more power outa my boy's d16z6 with d16 a piston y0 low number y0 oh btw i tow better with such low tourque numbers i'm willing to bet that you tow poorly <====)

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boogatheripper &raquo;</TD></TR><TR><TD CLASS="quote"> i got more power outa my boy's d16z6 with d16 a piston y0 low number y0 oh btw i tow better with such low tourque numbers i'm willing to bet that you tow poorly &lt;====)</TD></TR></TABLE>


umm no...for bolt ons 154whp is good for an si props to you

 

seem like good numbers, get some a/f tuning and i bet you can get a cpl more horse

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd &raquo;</TD></TR><TR><TD CLASS="quote">nope, not impressed...</TD></TR></TABLE>

shut ur face, those are some damn nice numbers bro, especially for what mods you have!

 

 

ditch the stock cams.

 

Good #'s man. You made the same amount of torque as I did, except I have cams .

 

Those torque numbers are pretty low and horsepower is not bad.

If your happy then :

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boogatheripper &raquo;</TD></TR><TR><TD CLASS="quote"> i got more power outa my boy's d16z6 with d16 a piston y0 low number y0 oh btw i tow better with such low tourque numbers i'm willing to bet that you tow poorly &lt;====)</TD></TR></TABLE>What the hell? Ban?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95excoupeMT &raquo;</TD></TR><TR><TD CLASS="quote">


umm no...for bolt ons 154whp is good for an si props to you </TD></TR></TABLE>

very true. good whp

 

not bad numbers.... i had something like 148hp and 101tq with only poopy i/h/e

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boogatheripper &raquo;</TD></TR><TR><TD CLASS="quote"> i got more power outa my boy's d16z6 with d16 a piston y0 low number y0 oh btw i tow better with such low tourque numbers i'm willing to bet that you tow poorly &lt;====)</TD></TR></TABLE>
man, there are so many pointless posts with a negative attidude lately...whats with that?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racerx707 &raquo;</TD></TR><TR><TD CLASS="quote">
man, there are so many pointless posts with a negative attidude lately...whats with that?</TD></TR></TABLE>

That guy is just a POS.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecvoodoo &raquo;</TD></TR><TR><TD CLASS="quote">ditch the stock cams.</TD></TR></TABLE>

Thanks for the advice. All in due time.

I pick up my new block and crank sunday after work. Being sent out to RS Machines for 85mm sleeves and steped deck. Going w/ crower's and 85mm Arias 12.6:1's. Top end will be a Portflow PR3 w/ Skunk2 stage 2's and full valvetrain. Should make a 'lil more power then what I am now.

Thanks for the kind words and the not so kind. I like it.

 

interesting

 

Nice numbers.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecvoodoo &raquo;</TD></TR><TR><TD CLASS="quote">ditch the stock cams.</TD></TR></TABLE>

 

thats ok, you should have gotten a different kind of intake manifold, skunk2 is the same at type R

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boogatheripper &raquo;</TD></TR><TR><TD CLASS="quote"> i got more power outa my boy's d16z6 with d16 a piston y0 low number y0 oh btw i tow better with such low tourque numbers i'm willing to bet that you tow poorly &lt;====)</TD></TR></TABLE>
it had to be newbee. what wrong w/ u and what up w/ the yo's those numbers arent that bad and he didnt even mess with th fuel. To top it off u had to bring your homeboy into this ... where is your dyno sheet impress us"yO"

 

how much did they charge?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock93cx &raquo;</TD></TR><TR><TD CLASS="quote">thats ok, you should have gotten a different kind of intake manifold, skunk2 is the same at type R</TD></TR></TABLE>

Yeah no ****. Skunk2 is cheaper then a new ITR one and the AEBS wasn't even out yet. What do you recomend I go with JG? Or maybe an Endyn one or yeah TWM IBS's. ........

 

Very good numbers for no a/f tuning. And I don't care what others say, your tq numbers seem to be right on par for the motor.

Now, not to say you did anything wrong, because only you know what really works. But, just to add some advice to the thread: According to the Hondata tuning web page, After you find out where the tq curves cross each other, which you did and found out it is at 5000, they say you should drop it down 100-200 more rpm to completely smooth the curve. I'm sure it's much smoother then when it was at 5500 anyways.

But anyways, I'm sure you won't see much of a difference, but it might be worth a shot. Oh, and how come you didn't play around with the FPR any?

Good luck with your big bore b16 build up.