Ok here's the story. I just got off the phone with ARI and they said they can get some custom eagle rods and je pistons for 875 for my h23. My question is, With h22 rods will i have to use h22 or h23 pistons? Also what would have to be customized on these pistons?? I'm lookin to keep around 9.5:1 compresson

 

why not just get probe h23 rods and h23 or h22 pistons

 

well i was gonna buy those from you then i got a email about a special goin on at wiredspeedlab saying that i can get eagle rods for about 300. then i can get pistons 475.

I'm just trying to keep my options open.

 

you can't use an H22a rod on an h23a crank cause it's too long...the piston will stick out of the deck.

You have to match crank and rods. The pistons are interchangeable as they have the same compression height. H22a rods on an H23a crank need a custom piston.

 

so what would need to be custom on the pistion??

 

yeh you can do custom pistons je will do it but trust me there doing to be more then 475 or 500

 

what i am doing for two guys:

1- ordered eagle h22 rods (300 shipped )and did custom CP pistons:
2- ordered Ef 1 turbo rods (able to hold up to 800hp) and is getting Custom Cp pistons:


custom set of CP pistons made to run h22 rods in H23's

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 &raquo;</TD></TR><TR><TD CLASS="quote">what i am doing for two guys:

1- ordered eagle h22 rods (300 shipped )and did custom CP pistons:
2- ordered Ef 1 turbo rods (able to hold up to 800hp) and is getting Custom Cp pistons:


custom set of CP pistons made to run h22 rods in H23's</TD></TR></TABLE>

How much are both of those options??

 

925 with the Ef 1 turbo rods and bolts and 850 with the eagle rods

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flip1199 &raquo;</TD></TR><TR><TD CLASS="quote">so what would need to be custom on the pistion??</TD></TR></TABLE>
The wrist pin would have to be closer to the dome to compensate for the longer rod.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KTeller8 &raquo;</TD></TR><TR><TD CLASS="quote">925 with the Ef 1 turbo rods and bolts and 850 with the eagle rods</TD></TR></TABLE>

Damn that's a good price. I think i'll go with the 850 one though in about a month or so.

 

if i were you, i would just get h23 eagle rods, and je 9.5:1 pistons
to go with your h23 crank

 

umm, to bad they don't make eagle h23 rods.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flip1199 &raquo;</TD></TR><TR><TD CLASS="quote">umm, to bad they don't make eagle h23 rods.</TD></TR></TABLE>

my bad, i meant to say crower rods

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">my bad, i meant to say crower rods </TD></TR></TABLE>

THose are very expensive from my knowledge.. i think he is trying to stay somewhat as low expense as possible

 

Crower ~675
Pauter ~690
Carillo ~175ea
any other companies????

 

well for about 3g's you can have a complete bottom end built for an h23
by golden eagle, sleeves, crower rods, je pistons, crank balanced
and micropolished. the works.
that's how i'm gonna do it

 

only other brand is probe rods for 380shipped

 

well i think im gonna go with the custom cp pistons and scat h22 rods. There only 295 and they say they can handle anything i can throw at them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flip1199 &raquo;</TD></TR><TR><TD CLASS="quote">well i think im gonna go with the custom cp pistons and scat h22 rods. There only 295 and they say they can handle anything i can throw at them. </TD></TR></TABLE>

what is scat? for five bucks more you can get eagles... those i know are at least decent!

 

scat as in scat crankshafts. They are a domestic company that's been in the high performance industry for the past 35 years. Their rods are 4340 forged h-beam rods with arp bolts.

Here's a pic of there rods.