I bought a B16 with an LSD and the only thing really wrong (that I know of at the moment) is that the intermediate shaft boot is ripped. I'm not sure if there are USDM pieces that will fit, because I'm going to use the SiR axles that came with my swap. If anyone knows where to get something that fits, please let me know. Any help is much appreciated.

Thanks,
Ryan

 

I didn't know that intermediate shafts had boots.

 

You know what, you're probably right. I did take some pics that I'm going to post. I bet its the boot of the old axle. Anywho, I'll get the pics up and hopefully someone can tell me what the hell is going on there.

 

there was definately no boot on the intermediate shaft... and a 90-93 integra int shaft is the same as the 1st gen B16's (atleast the J1's and S1's)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crXBoy69 &raquo;</TD></TR><TR><TD CLASS="quote">there was definately no boot on the intermediate shaft... and a 90-93 integra int shaft is the same as the 1st gen B16's (atleast the J1's and S1's)</TD></TR></TABLE>

Y1 too