Greddy kit with FMIC(update)
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Greddy kit with FMIC(update)
You guys all remember my old dyno without an IC. https://honda-tech.com/zerothread?id=605288
Well, I finally installed my IC the other week and took it to the dyno.
Now, this was done on a Clayton Dyno so, the numbers are going to be lower, due to the dyno having 4 rollers, instead of 1.
It looks like this,
On a dynopack or dynojet my numbers will be higher.
Now to the results, the blue is with IC and the red was without , from the last dyno.
215whp and 195ft tq
These numbers are still with no tuning and only 2 1/4 pipping.
Everything was the same as last dyno, execpt the IC.
So, now all you guys see what a big difference an IC can make.
Ill be posting up a vid soon, when I find someone to host it.
Well, I finally installed my IC the other week and took it to the dyno.
Now, this was done on a Clayton Dyno so, the numbers are going to be lower, due to the dyno having 4 rollers, instead of 1.
It looks like this,
On a dynopack or dynojet my numbers will be higher.
Now to the results, the blue is with IC and the red was without , from the last dyno.
215whp and 195ft tq
These numbers are still with no tuning and only 2 1/4 pipping.
Everything was the same as last dyno, execpt the IC.
So, now all you guys see what a big difference an IC can make.
Ill be posting up a vid soon, when I find someone to host it.
Trending Topics
lol
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Re: Greddy kit with FMIC(update) (jerky)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jerky »</TD></TR><TR><TD CLASS="quote">are you planning on getting a hi flow cat?</TD></TR></TABLE>
Yes, Im still gathering info on it, since I dont want a check engine light from the o2.
Hopefully by next week a high flow car and 3inch pipping will be on.
Yes, Im still gathering info on it, since I dont want a check engine light from the o2.
Hopefully by next week a high flow car and 3inch pipping will be on.
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Re: Greddy kit with FMIC(update) (03ephatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 03ephatch »</TD></TR><TR><TD CLASS="quote">looking prrrty. how much did this kit run you? 
</TD></TR></TABLE>
You can get it from Showstoppers for about $2650.
</TD></TR></TABLE>You can get it from Showstoppers for about $2650.
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Re: Greddy kit with FMIC(update) (Unit-X)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Unit-X »</TD></TR><TR><TD CLASS="quote">what boost are u running?</TD></TR></TABLE>
6.5 psi.
BTW-Thanks for all the good comments guys
6.5 psi.
BTW-Thanks for all the good comments guys
Honda-Tech Member
Joined: Jul 2003
Posts: 3,295
Likes: 0
From: CA, us
Re: Greddy kit with FMIC(update) (anjapower)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by anjapower »</TD></TR><TR><TD CLASS="quote">How did you remove the Honda emblem in the grill? Is the backing plate still there or is it clean plastic mesh?
Nice numbers btw </TD></TR></TABLE>
looks like he painted flat black.
Nice numbers btw
</TD></TR></TABLE>looks like he painted flat black.
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Re: Greddy kit with FMIC(update) (anjapower)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by anjapower »</TD></TR><TR><TD CLASS="quote">How did you remove the Honda emblem in the grill? Is the backing plate still there or is it clean plastic mesh?
Nice numbers btw </TD></TR></TABLE>
All I did was remove the Chrome H, just has 2 screws behind the grill.
Nice numbers btw
</TD></TR></TABLE>All I did was remove the Chrome H, just has 2 screws behind the grill.
Thread Starter
Member
Joined: Dec 2001
Posts: 2,978
Likes: 1
From: los angeles, ca, united states
Re: Greddy kit with FMIC(update) ([626]JDM-b16a-EF9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by [626 »</TD></TR><TR><TD CLASS="quote">JDM-b16a-EF9]hey, that last picture looks like great photography, I wonder who took that...
</TD></TR></TABLE>
Send me the pics Brad!
</TD></TR></TABLE>
Send me the pics Brad!
Honda-Tech Member
Joined: Jul 2001
Posts: 6,190
Likes: 0
From: Pasadena, CA, USA
Re: Greddy kit with FMIC(update) (eg_nezay)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_nezay »</TD></TR><TR><TD CLASS="quote">
Send me the pics Brad!</TD></TR></TABLE>
as you wish...
Send me the pics Brad!</TD></TR></TABLE>
as you wish...