The topic sums it up. I need the dimensions of the Type 31 intercooler. Thanks!

 

Bump

 

go to http://www.greddy.com and you will find

 

I have checked their site but they don't list the dimensions of the intercooler.

 

195mm x 600mm x 76mm

 

type 31 is smaller than type 24 btw.

 

^yeah I know. I dont want to cut up my bumper support, so I want the smaller one.

 

Is that the core or endtank to endtank?

 

I put the Type 24 on my hatch and did'nt have to cut the bumper support. Go for the big boy 24!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eyetattoo &raquo;</TD></TR><TR><TD CLASS="quote">Is that the core or endtank to endtank?</TD></TR></TABLE>

I don't know, those are just the published specs. I don't have a garage or I'd go downstairs to check. Maybe someone can check theirs, otherwise I'll let you know tomorrow. BTW, the type 24 is 280mm high.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">I put the Type 24 on my hatch and did'nt have to cut the bumper support. Go for the big boy 24!! </TD></TR></TABLE>

type 24 baby!

 

Is this it? IF so I'll measure it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by roydogg &raquo;</TD></TR><TR><TD CLASS="quote">Is this it? IF so I'll measure it

</TD></TR></TABLE>Yeah I think thats it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton &raquo;</TD></TR><TR><TD CLASS="quote">I put the Type 24 on my hatch and did'nt have to cut the bumper support. Go for the big boy 24!! </TD></TR></TABLE>

is that because you removed the support instead?

 

^^
That is what it looks like

 

It's 7 1/2" x 2 1/2 x 31".