FS: lsvtec swap, skunk2 cams, etc, $2600
Thread Starter
Joined: Aug 2002
Posts: 605
Likes: 0
From: San Diego, Ca, US
FS: lsvtec swap, skunk2 cams, etc, $2600
Price change! Im moved back to LA so the motor is at my parents house and I NEED to get it out of there. EMAIL ME, FUSIONEG@HOTMAIL.COM
LS vtec swap, but no tranny. Mounts, axles, and a p72 with a modified skunk2 program. Skunk2 stage 2 cams.
$3000 for everything with ITR Throttle body, and skunk2 stage 2 cams.
LSvtec: 1 year old - ~20,000 miles on it. (i go to school in LA so I drove a lot from SD to LA)
balanced and blueprinted
pr3 pistons
rings and everything moving were replaced on it.
lightened crank
ARP rod bolts
ARP head studs
b16 head
ITR throttle body or stock b16
skunk2 stage2 cams or b16 cams
portflow inner valvesprings
portflow Ti retainers
HEAD had a 3 angle valve job and was polished
Combustion chambers were welded a little bit to up the compression
I put down 180 with this motor untuned and 130 tq
LS vtec swap, but no tranny. Mounts, axles, and a p72 with a modified skunk2 program. Skunk2 stage 2 cams.
$3000 for everything with ITR Throttle body, and skunk2 stage 2 cams.
LSvtec: 1 year old - ~20,000 miles on it. (i go to school in LA so I drove a lot from SD to LA)
balanced and blueprinted
pr3 pistons
rings and everything moving were replaced on it.
lightened crank
ARP rod bolts
ARP head studs
b16 head
ITR throttle body or stock b16
skunk2 stage2 cams or b16 cams
portflow inner valvesprings
portflow Ti retainers
HEAD had a 3 angle valve job and was polished
Combustion chambers were welded a little bit to up the compression
I put down 180 with this motor untuned and 130 tq
