D-series HMT ( homemade turbo ) kit for sale. Georgia. Check it.
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 684
Likes: 0
From: Atlanta, GA
D-series HMT ( homemade turbo ) kit for sale. Georgia. Check it.
Not complete.. but I was almost there before I did a 180. Never installed, but everything is great. Here ya go..
Never installed. Just don't have the time. It's not complete, but mostly.
Here's what it is.
1g Dsm 14b turbo w/wastegate: Minimal Shaft play.No chipped blades. No cracks in Compressor housing. Very good condition. Person I got it off of was boosting fine without any trouble at all. Cleaned up a little.
HF Manifold: Good for a D-series turbo setup. Perhaps needs a little sanding and cleaning if you want to bling, but I wasn't going to really do anything but use it to haul ***.
14b/HF Manifold Downpipe: Good deal here. It's in shape and thick. Ready to be bolted up to whatever you have though should be mated to a 2" catback. Already has the flange for the 14b exhaust housing outlet, so bolt and burn.
1g DSM Intercooler: Sleeper effect. It's got a little red stuff on it from the Eclipse being repainted but it works fine. Civics can mount this under the wheel well where there's this bolt hole.. it'll scare you how much it looks like it fits there. This goes for any year from 88 - 2000. Trust me.. i've researched too much.
1g DSM Blow Off Valve and Flange: It's loud enough, but i'm sure you've heard it. Nothing too fancy, a stock DSM BOV and the flange you need to weld it to your new Upper I/M I/C piping. That way you don't have to do that nasty flange hunting. [IMG][http://www.imagestation.com/picture/...1c3e4.jpg/IMG]
1g DSM 450CC Injectors: Working order. Took him off of his car and he handed them over to me for a price. Needed to up the fuel when you force induct your motor. Course it wasn't built for that type of stuff.
[IMGhttp://www.imagestation.com/picture/sraid83/pc5d0437c6c969a56b9509c554672242c/fae1c3e7.jpg][/IMG]
CRX Resistor Box: To run the Injectors. In working order but the only thing I dont have a pic of. Have to dig it out of my car.
Brand new Oil feed kit: Stainless -an lines that are specifically for a 14b Civic setup. Comes with all stainless steel hoses and fittings to run your oil feed without dangers of high temps or cracking the oil feed point. NEVER BEEN USED!!! FLAMENCO T!!!
Alot of Flanges you need: So that way you dont have to do flange hunting. One of the main ones is the turbo start flange, and it's right there bolted onto the turbo in one of the pics I have.
Bov Flange
Miscellaneous pipes: So you can fit and see that you really ONLY NEED TWO INTERCOOLER pipes to finish the turbo kit off.
Information: I'm heading a different direction with my money, so i'm just only trying to get what I paid for this stuff back.
The intercooler WILL Work for your small setup. It's capable of handling up to around 13-15psi ( not EXACTLY sure.. ) without the dangers of heating it. Besides, it came on a factory vehicle that's got more power than a D series motor. Think about that.
If you can't get to them, then email me at Kn_ives@msn.com and i'll upload them to you as soon as I can. I have more so specify which part of the kit you want to see.
Feel free to ask questions and make offers. And if you aren't really interested, then either pass the word or just don't say anyting at all. Thanks everyone.
By the way. I will not seperate it if anyone wants to know. I can't afford to wait for someone to pick apart every little piece.
Asking: 670 plus shipping. 30080 Atlanta, GA will be the address it's coming from or Zip.
DO NOT PRIVATE MESSAGE THIS NAME! It's not mines it's my roomates and he's letting me use it to sell. I accept Paypal. But I dont want your money orders.. because this way we can both be safe about our transactions. Will ship ALMOST anywhere! Thanks.
AIM NAME: MLX3R.
Never installed. Just don't have the time. It's not complete, but mostly.
Here's what it is.
1g Dsm 14b turbo w/wastegate: Minimal Shaft play.No chipped blades. No cracks in Compressor housing. Very good condition. Person I got it off of was boosting fine without any trouble at all. Cleaned up a little.
HF Manifold: Good for a D-series turbo setup. Perhaps needs a little sanding and cleaning if you want to bling, but I wasn't going to really do anything but use it to haul ***.
14b/HF Manifold Downpipe: Good deal here. It's in shape and thick. Ready to be bolted up to whatever you have though should be mated to a 2" catback. Already has the flange for the 14b exhaust housing outlet, so bolt and burn.
1g DSM Intercooler: Sleeper effect. It's got a little red stuff on it from the Eclipse being repainted but it works fine. Civics can mount this under the wheel well where there's this bolt hole.. it'll scare you how much it looks like it fits there. This goes for any year from 88 - 2000. Trust me.. i've researched too much.
1g DSM Blow Off Valve and Flange: It's loud enough, but i'm sure you've heard it. Nothing too fancy, a stock DSM BOV and the flange you need to weld it to your new Upper I/M I/C piping. That way you don't have to do that nasty flange hunting. [IMG][http://www.imagestation.com/picture/...1c3e4.jpg/IMG]
1g DSM 450CC Injectors: Working order. Took him off of his car and he handed them over to me for a price. Needed to up the fuel when you force induct your motor. Course it wasn't built for that type of stuff.
[IMGhttp://www.imagestation.com/picture/sraid83/pc5d0437c6c969a56b9509c554672242c/fae1c3e7.jpg][/IMG]
CRX Resistor Box: To run the Injectors. In working order but the only thing I dont have a pic of. Have to dig it out of my car.
Brand new Oil feed kit: Stainless -an lines that are specifically for a 14b Civic setup. Comes with all stainless steel hoses and fittings to run your oil feed without dangers of high temps or cracking the oil feed point. NEVER BEEN USED!!! FLAMENCO T!!!
Alot of Flanges you need: So that way you dont have to do flange hunting. One of the main ones is the turbo start flange, and it's right there bolted onto the turbo in one of the pics I have.
Bov Flange Miscellaneous pipes: So you can fit and see that you really ONLY NEED TWO INTERCOOLER pipes to finish the turbo kit off.
Information: I'm heading a different direction with my money, so i'm just only trying to get what I paid for this stuff back.
The intercooler WILL Work for your small setup. It's capable of handling up to around 13-15psi ( not EXACTLY sure.. ) without the dangers of heating it. Besides, it came on a factory vehicle that's got more power than a D series motor. Think about that.
If you can't get to them, then email me at Kn_ives@msn.com and i'll upload them to you as soon as I can. I have more so specify which part of the kit you want to see.
Feel free to ask questions and make offers. And if you aren't really interested, then either pass the word or just don't say anyting at all. Thanks everyone.
By the way. I will not seperate it if anyone wants to know. I can't afford to wait for someone to pick apart every little piece.
Asking: 670 plus shipping. 30080 Atlanta, GA will be the address it's coming from or Zip.
DO NOT PRIVATE MESSAGE THIS NAME! It's not mines it's my roomates and he's letting me use it to sell. I accept Paypal. But I dont want your money orders.. because this way we can both be safe about our transactions. Will ship ALMOST anywhere! Thanks.
AIM NAME: MLX3R.
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 684
Likes: 0
From: Atlanta, GA
Thanks for the free bump.
475 still is kinda low. I'm willing to work stuff out but i'm not willing to lose too much money off of something I never installed.
Minus the IC and Injectors i'll do 525 + shipping. But not any lower.
I'm going to put this up on Homemadeturbo.com right now since I finally have time. Thanks for the offer, I really appreciate it.
475 still is kinda low. I'm willing to work stuff out but i'm not willing to lose too much money off of something I never installed.
Minus the IC and Injectors i'll do 525 + shipping. But not any lower.
I'm going to put this up on Homemadeturbo.com right now since I finally have time. Thanks for the offer, I really appreciate it.
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 684
Likes: 0
From: Atlanta, GA
Trades List:
I'll knock off money for these things.
D series performance headers.
2/3 door Eg Fogs with assembly ( always wanted some of those. )
A decent pair of seats ( No rips at all ). Just let me know what seats and stuff, not so sure about this one.
Another set of unpainted HX wheels!
That's about it. But let me know what you have anyway, I may be interested.
I'll knock off money for these things.
D series performance headers.
2/3 door Eg Fogs with assembly ( always wanted some of those. )
A decent pair of seats ( No rips at all ). Just let me know what seats and stuff, not so sure about this one.
Another set of unpainted HX wheels!
That's about it. But let me know what you have anyway, I may be interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
dohcMONSTER
Classifieds: Forced Induction
10
Aug 2, 2004 04:13 PM
