sorry this is sort of OT, but i got my jdm mirrors to work. now problem is how do i get the wires from the door to the inside? i have seen how tos but i havent seen how they put the wires through. can anybody help me with a pic? or how they did it? thanks alot

 

somebody must be a JDM ***** and have done this before!

 

Just follow where the door harness goes and it will end up under the dash. It's not hard to figure out how the wires run, it's just hard to actually run the wires.

 

im a visual learner, pics would be nice!

 

elp me...

 

we can do it at the meet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by all stock &raquo;</TD></TR><TR><TD CLASS="quote">we can do it at the meet. </TD></TR></TABLE>
just finished it like 1 hour ago, everythings working and looks pretty close to OEM. mirrors are going to get painted tomorrow!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanic69er &raquo;</TD></TR><TR><TD CLASS="quote">

pix plz</TD></TR></TABLE>
pix will be up soon with a video, and i will have a easier insturction on to wire. ETA time for my mirrors from the body shop...wednesday!

 

how did you get through the connector in the door that leads to tbe body.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twuelfing &raquo;</TD></TR><TR><TD CLASS="quote">how did you get through the connector in the door that leads to tbe body.</TD></TR></TABLE>
i will take pictures tonight no how i did it, theres 2 ways your can do it, my way (which canuck-mx6) told me how to do, or you can go throught the rubber gasket on the side which is too hard to do and not worth the time.

 

heres how i did routed the wiring. i thought this was the best way to do it and most simplist.