installed a short ram from aem 2 weeks ago, lately i have been noticin a stall when goin from a low idle. I pulled the big 80 amp fuse when puttin it in. So is this due to the AEM messin up or do I need to add a alot of fuel system cleaners and such to try and clean it out to compensate for more air intake?

 

mine did the same thing sort of.. sometimes when i was sitting in traffic, car would idle real real low sometimes but not stall. id rev it up a little and it would idle normal & then drop again. i reset my ecu and everything's cool. > start engine & let idle for ~5 minutes. turn off & pull the fuse labeled back-up (7.5A) and chill for ~5 minutes. replace fuse and start engine and let idle for a piece. turn off, start back up and no more stalling

 

Never heard of a problem like that from just installing a short ram.