So I mounted a Spoon lip to a 5th gen...
Thread Starter
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
So I mounted a Spoon lip to a 5th gen...
And it turned out pretty good.
Some notes:
1) I used a 1 layer CF lip that was flimsy as hell, I had to cut reliefs at the corners to get it to bend, the 5th gen has a more square front.
2) There is a gap between in the middle of the bumper, I will have to fill this in when I actually 'modify it. So photoshoppers feel free to fill it in.
3. The sides come in and fit to the bottom of the bumper...most 5th gen lipas actually go above the lip on the bumper which makes the CF ones look terrible imo.
Anyways comments and suggestions are welcome
Haha that's being held on by clothespins
Some notes:
1) I used a 1 layer CF lip that was flimsy as hell, I had to cut reliefs at the corners to get it to bend, the 5th gen has a more square front.
2) There is a gap between in the middle of the bumper, I will have to fill this in when I actually 'modify it. So photoshoppers feel free to fill it in.
3. The sides come in and fit to the bottom of the bumper...most 5th gen lipas actually go above the lip on the bumper which makes the CF ones look terrible imo.
Anyways comments and suggestions are welcome
Haha that's being held on by clothespins
Thread Starter
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
Re: So I mounted a Spoon lip to a 5th gen... (92`Legend)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92`Legend »</TD></TR><TR><TD CLASS="quote">yea isn't that ur 4th gen lip you got stuck on there? damn it's pretty close 
</TD></TR></TABLE>
Yeah it's like the first one I ever did...it's flimsy and looks terrible!
</TD></TR></TABLE>Yeah it's like the first one I ever did...it's flimsy and looks terrible!
Junior Member
Joined: Sep 2002
Posts: 463
Likes: 0
From: Tallahassee, FL, US
Re: So I mounted a Spoon lip to a 5th gen... (Type_SH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Type_SH »</TD></TR><TR><TD CLASS="quote">how much for one?</TD></TR></TABLE>
Im guessing around $400 + shipping like it says in his sig
Im guessing around $400 + shipping like it says in his sig
Trending Topics
Thread Starter
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
Re: So I mounted a Spoon lip to a 5th gen... (ZoNe_HKS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ZoNe_HKS »</TD></TR><TR><TD CLASS="quote">hey is that a 5th gen rear rims i see on ur 4th gen?? hehe let me see a pic of that!</TD></TR></TABLE>
hehe only halfway through the conversion
racer style y0!
hehe only halfway through the conversion
racer style y0!
Thread Starter
Member
Joined: Mar 2002
Posts: 8,113
Likes: 3
From: East Village, NYC
Re: (Honda Sport)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda Sport »</TD></TR><TR><TD CLASS="quote">looks good. I'm still saving up for a 4th gen lip. OT but for the rears, did you just replace the rear hubs? you gonna do the front? a write-up would be good.</TD></TR></TABLE>
rear = hub and spindle/bearing
front = entire knuckle assembly. I could do a write up but there's already a really good one on PO.com
rear = hub and spindle/bearing
front = entire knuckle assembly. I could do a write up but there's already a really good one on PO.com
Thread
Thread Starter
Forum
Replies
Last Post
98TypeSH
Honda Prelude
1
Jul 14, 2004 02:50 PM
