My tranny didn't "die" but some fuse for the reverse messed up. The Honda dealer voided my warranty cause of the VAFC. Even though I disconnected the vafc, they eventually found the rest of the wiring. So I am pretty f-d.

Can you guys please help me reinstall my VAFC. I've gotten to the the wires under the carpet already, but I just can't understand the instructions for all the wires. Any help would be great! PLEASE!! I don't want to pay another $100 to get it installed.

Thanks you guys

 

you need to look at the wires as your looking right at the ecu...its really hard to explain....i dont know if that helped lol

 

With the instruction book you can get from the Apexi Website Look at the diagram for your engine harness(it will specify which one in the instructions)..They tell you exactly where the wire needs to go, and on a different page, they will specify which wire needs to go before the other on the harness. Make sure you splice into the right wire, because on my 4g, the harness was upside down compared to the picture...Not sure what else to tell you, basicly just take your time, look at the diagram correctly and you will have no problem.

 

These are the most specific Lude VAFC write ups I have found, read through them thoroughly..If you have any more ?'s post em up specifically.

http://www.ntpog.org/mods/fifth-afc/afc.shtml

HTH

PS* also click on the link about Arax's write up w/in that article, my browser is being stupid and will not let me go to the link

 

THANKS!