i have a 91 integra with a b16 that is preatty much stock besides ctr cams and bolt ons.
i just bought a ls block the other day and i'm starting to build my ls vtec.
]
i'm going to bore the block .25 over and use b16(pr3) over sized pistons. (11.5 cr)
new rod bearings, main bearings, arp rod bolts, arp head bolts, shot peen the rods, type r oil pump, act pro light fly wheel, ctr cams and type r valve train.

is there anything else i should be doing or geting and did i miss anything.

how much wheel hp should this give me and how fast do you guys think this will make me in the 1/4 mile?

 

pretty much hardware you have everything
but you didnt describe the bolt ons
and what you asked about your HP
it all depends on tunning and what program you are using
so there cant be a straigh answer on this one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by big reds &raquo;</TD></TR><TR><TD CLASS="quote">pretty much hardware you have everything
but you didnt describe the bolt ons
and what you asked about your HP
it all depends on tunning and what program you are using
so there cant be a straigh answer on this one
</TD></TR></TABLE>
i have the basic bolt ons already
like dc 4-2-1 stanless steel header
3" short ram intake
2.5" exhaust magnaflow muffler cat sound cat

but with the above set up around how much power can i be expecting
and about how fast will this set up put me in the 1/4 mile
14's at least right??