I opted to post this here cause I figure most us forced induction guys use a breather filter on the valve cover. I was just wondering where I can order a few from cause the one Im using is about shot. Thanks in advance.

 

Checker Auto usually has them in stock around here. Other than that, Summit Racing has always had them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integra_gsr98 &raquo;</TD></TR><TR><TD CLASS="quote">Checker Auto usually has them in stock around here. Other than that, Summit Racing has always had them.</TD></TR></TABLE>

Anyone know the summit part number. I went to the site and there are several different types. I dont car what it looks like as long as it fits my B series valve cover. Id hate to spend liek 20 bucks on it and it doesent even fit.

 

Just get one with an ID that matches your valvecover:
http://store.summitracing.com/...ather

Or, go down to Kragen, Autozone, Pep Boys, etc. Those places carry them.

 

Use a 'push in' type with a short length of hose. That way you can replace the hose when it gets worn. With the clamp on, after the rubber gets worn out, you gotta toss it out.

 

jegs has them too

 

any local performance shop should have one.. just go to a larger shop.. they might have it in stock..

just be carefull as it might get filled with oil after a while.. it pushes the air out.. so i don't see the need for filter while driving.