Max bore on a sleved B20??
New User
Joined: Mar 2001
Posts: 12,296
Likes: 0
Re: Max bore on a sleved B20?? (AfearlessMF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AfearlessMF »</TD></TR><TR><TD CLASS="quote">any help?</TD></TR></TABLE>
If it is sleeved you can go up to 84.5mm max RECOMMENDED but depending manufacturer of the sleeves some can go to 85mm but not recommended but have never heard of sleeves cracking anyways from going that far. I had some 85mm in my old block, they didn't split but sunk but completely nrelated to bore size. On an all motor set up sleeved you can go 86mm
If it is sleeved you can go up to 84.5mm max RECOMMENDED but depending manufacturer of the sleeves some can go to 85mm but not recommended but have never heard of sleeves cracking anyways from going that far. I had some 85mm in my old block, they didn't split but sunk but completely nrelated to bore size. On an all motor set up sleeved you can go 86mm
Honda-Tech Member
Joined: May 2001
Posts: 5,698
Likes: 0
From: Midwest
Re: Max bore on a sleved B20?? (Mpir3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mpir3 »</TD></TR><TR><TD CLASS="quote">Aren't b20's 84mm stock?</TD></TR></TABLE>
Yes
Yes
Thread
Thread Starter
Forum
Replies
Last Post
YashiMotors
Forced Induction
5
May 29, 2007 01:28 PM
