is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft?
Thread Starter
Junior Member
Joined: Dec 2001
Posts: 799
Likes: 0
From: PA, USA
is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft?
just like the title says. i was looking for a 90-93 Integra intermediate shaft and cant find one. so can i use the one that comes with B16A1 swaps?
Joined: Feb 2003
Posts: 2,136
Likes: 0
From: North NJ, usa
Re: is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft? (98AccordEX)
The b16a intemediate shaft will not work with 90 93 teg axles.
Just get 90 teg intermediate shaft and the left and right axles and that will work
Just get 90 teg intermediate shaft and the left and right axles and that will work
Honda-Tech Member
Joined: Feb 2002
Posts: 5,723
Likes: 1
From: BC
Re: is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft? (SiRWanabe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRWanabe »</TD></TR><TR><TD CLASS="quote">The b16a intemediate shaft will not work with 90 93 teg axles.
Just get 90 teg intermediate shaft and the left and right axles and that will work</TD></TR></TABLE>
Don't give out Misinfo.
The JDM S1/J1 (Integra B16A) intermediate shafts work FINE with 90-93 axles. This is what I'm using. The CRX Sir Y1/YS1 intermediate shafts are a different length... go to http://www.hasport.com to check out what they have to say about this.
Just get 90 teg intermediate shaft and the left and right axles and that will work</TD></TR></TABLE>
Don't give out Misinfo.
The JDM S1/J1 (Integra B16A) intermediate shafts work FINE with 90-93 axles. This is what I'm using. The CRX Sir Y1/YS1 intermediate shafts are a different length... go to http://www.hasport.com to check out what they have to say about this.
Member
Joined: May 2001
Posts: 2,599
Likes: 0
From: Canada eh
Re: is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft? (SiRWanabe)
the J1/S1 int shaft is the same thing as a 90-93 integra one... besides they all came out of integras... the Y1 is the one that does not work right... go to hasport.com and go to the axle write up... they explain everything there really well...
Joined: Feb 2003
Posts: 2,136
Likes: 0
From: North NJ, usa
Re: is there a difference in the 90-93 Integra intermediate shaft and the B16A1 shaft? (Mr. S)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. S »</TD></TR><TR><TD CLASS="quote">
Don't give out Misinfo.
The JDM S1/J1 (Integra B16A) intermediate shafts work FINE with 90-93 axles. This is what I'm using. The CRX Sir Y1/YS1 intermediate shafts are a different length... go to http://www.hasport.com to check out what they have to say about this.
</TD></TR></TABLE>
My fault, I was told I need a 90- 93 Teg intermediate shaft and the left and right axles from a 90 -93 teg to work with my J1 tranny. That's great news, I'm glad you cleared that up.
Don't give out Misinfo.
The JDM S1/J1 (Integra B16A) intermediate shafts work FINE with 90-93 axles. This is what I'm using. The CRX Sir Y1/YS1 intermediate shafts are a different length... go to http://www.hasport.com to check out what they have to say about this.
</TD></TR></TABLE>
My fault, I was told I need a 90- 93 Teg intermediate shaft and the left and right axles from a 90 -93 teg to work with my J1 tranny. That's great news, I'm glad you cleared that up.
Thread
Thread Starter
Forum
Replies
Last Post
NAIIAWAH
Honda CRX / EF Civic (1988 - 1991)
2
May 16, 2006 06:39 PM
WhiteLightening
Honda CRX / EF Civic (1988 - 1991)
5
Jan 20, 2004 06:11 AM
Black R
Honda CRX / EF Civic (1988 - 1991)
9
Dec 2, 2002 05:04 PM
