Question
Thread Starter
Joined: Jul 2002
Posts: 224
Likes: 0
From: Florida, USA
Question
Okay, Im having a bit of trouble finding the pins to wire in my VTEC into my swap, My question is after doing a bit of research i found pins B3 (A/C Clutch relay)
and B8 (A/C Switch). Now since I removed my A/C could I un pin these from the ECU and use thier connectors, and would that cause a CEL?
and B8 (A/C Switch). Now since I removed my A/C could I un pin these from the ECU and use thier connectors, and would that cause a CEL?
Honda-Tech Member
Joined: Aug 2001
Posts: 15,369
Likes: 3
From: Redwood City, Ca
Re: Question (fsck3r)
In the future you'll get more interest and answers if you subject has the subject in it.
You should follow the link to wiring in my signature and see if you have the VTEC wires in your harness. If not, I would run new wires myself instead of pulling wires from a different part of the engine.
You should follow the link to wiring in my signature and see if you have the VTEC wires in your harness. If not, I would run new wires myself instead of pulling wires from a different part of the engine.
Thread Starter
Joined: Jul 2002
Posts: 224
Likes: 0
From: Florida, USA
Re: Question (Spade)
heh, yeah I guess so (it was late and I was tired 
But Skunk2uners said he sent me the connectors i would need in the mail today, so I should be set and Im very thankful to him
But Skunk2uners said he sent me the connectors i would need in the mail today, so I should be set and Im very thankful to him
Thread
Thread Starter
Forum
Replies
Last Post
turbotime
Honda Civic / Del Sol (1992 - 2000)
23
Jun 12, 2003 08:13 PM