Garage Sale: Lots of goodies, just click it, you know you want too.....lots of pics.
Thread Starter
Joined: Jul 2002
Posts: 757
Likes: 0
From: Rialto, CA, US
Garage Sale: Lots of goodies, just click it, you know you want too.....lots of pics.
First off let me say this, some of this stuff has been seen in "ISELLRIGHTHANDDRIVES" thread, it is some of the same items, he posted some items for me.
I would also like to say that i am located in So. Cali, so anyone local please feel free to inspect the items before purchasing.
Shipping is available for the right price.
Lets get this sale started:
______________________________________
-1- P75 Head (LS/B20) ported, and 3 angle valve job, comes with skunk2 valve springs and retainers, valve cover, intake manifold gasket still on it.
All the work on this head was done at 'ONE honda specialist in Rialto, CA.'
-----------------Asking $450.
-----------------Asking $575. w/ Skunk2 port matched intake manifold.
-----------------Asking $700. w/ Skunk2 Port matched intake manifold, and web stage 2 cams.
-----------------Asking $900. w/ Skunk2 Port matched intake manifold, web stage 2 cams, and a Ericks Racing ECU(OBD1, w/ clear ecu lid).
-2- Skunk2 Intake Manifold for LS/B20, Port matched for the head above.
-----------------Asking $200.
-3- Web Cams for LS/B20, Stage 2. Re-grinds(i believe).
-----------------Asking $200.
-4- Ericks Racing ECU, w/ clear ECU lid, OBD1, for LS/B20, it made 2 more whp over the skunk2 chip, and a has a better fuel curve, for use with a built or semi-built motor.
-----------------Asking $225.
-5- KATMAN/JHP.com chipped ECU, OBD1, for LS/B20, chipped with the Skunk2 program, for use with a built or semi-built motor..
-----------------Asking $175.
-6- Knock sensor, from a b-series motor (GSR to be exact).
-----------------Asking $35.
-7- LENSO rims 13x7.5 (i believe, might be 8 someone please correct me), spray painted camo green, they both have slicks on them still, one slick has a slice in it on the inside, it is no longer useable, only one good slick on the rims,
need to replace one, they have about 20 passes on them., plenty of meat left but the cut kinda killed it.
-----------------Asking $225.
-8- AEBS Water Pump Dummy, used if your running an extrenal water pump, i think its for a GSR.
-----------------Asking $70.
-9- Older LS valve covers, one has paint stripped off, other has paint chipping off.
-----------------Asking $30 each.
-10- Black Racing 4's, they are 14x6, i think the offset is 38, they come with falken zeix tires(with 98% tread left.), and brand new black valve stems. Professionally powder coated dukie brown, and then clear coated for maxium life. They also come with all 4 original center caps, very rare rim for a very rare price.
-----------------Asking $650.
______________________________________
i can get more pictures on request.
just let me know what you want a picture of and i will be glad to take it.
Thanks for looking,
sorry about the image sizes, its just for detail.
-tim
I would also like to say that i am located in So. Cali, so anyone local please feel free to inspect the items before purchasing.
Shipping is available for the right price.
Lets get this sale started:
______________________________________
-1- P75 Head (LS/B20) ported, and 3 angle valve job, comes with skunk2 valve springs and retainers, valve cover, intake manifold gasket still on it.
All the work on this head was done at 'ONE honda specialist in Rialto, CA.'
-----------------Asking $450.
-----------------Asking $575. w/ Skunk2 port matched intake manifold.
-----------------Asking $700. w/ Skunk2 Port matched intake manifold, and web stage 2 cams.
-----------------Asking $900. w/ Skunk2 Port matched intake manifold, web stage 2 cams, and a Ericks Racing ECU(OBD1, w/ clear ecu lid).
-2- Skunk2 Intake Manifold for LS/B20, Port matched for the head above.
-----------------Asking $200.
-3- Web Cams for LS/B20, Stage 2. Re-grinds(i believe).
-----------------Asking $200.
-4- Ericks Racing ECU, w/ clear ECU lid, OBD1, for LS/B20, it made 2 more whp over the skunk2 chip, and a has a better fuel curve, for use with a built or semi-built motor.
-----------------Asking $225.
-5- KATMAN/JHP.com chipped ECU, OBD1, for LS/B20, chipped with the Skunk2 program, for use with a built or semi-built motor..
-----------------Asking $175.
-6- Knock sensor, from a b-series motor (GSR to be exact).
-----------------Asking $35.
-7- LENSO rims 13x7.5 (i believe, might be 8 someone please correct me), spray painted camo green, they both have slicks on them still, one slick has a slice in it on the inside, it is no longer useable, only one good slick on the rims,
need to replace one, they have about 20 passes on them., plenty of meat left but the cut kinda killed it.
-----------------Asking $225.
-8- AEBS Water Pump Dummy, used if your running an extrenal water pump, i think its for a GSR.
-----------------Asking $70.
-9- Older LS valve covers, one has paint stripped off, other has paint chipping off.
-----------------Asking $30 each.
-10- Black Racing 4's, they are 14x6, i think the offset is 38, they come with falken zeix tires(with 98% tread left.), and brand new black valve stems. Professionally powder coated dukie brown, and then clear coated for maxium life. They also come with all 4 original center caps, very rare rim for a very rare price.
-----------------Asking $650.
______________________________________
i can get more pictures on request.
just let me know what you want a picture of and i will be glad to take it.
Thanks for looking,
sorry about the image sizes, its just for detail.
-tim
Trending Topics
Thread Starter
Joined: Jul 2002
Posts: 757
Likes: 0
From: Rialto, CA, US
Re: Garage Sale: Lots of goodies, just click it, you know you want too.....lots of pics. (Grocery Ge
These are for the people who dont buy rims unless they see them on car...
Modified by Grocery Getter at 3:19 PM 8/6/2003
Modified by Grocery Getter at 3:19 PM 8/6/2003
Thread
Thread Starter
Forum
Replies
Last Post