i got a front tie bar and im having trouble installing it.. i have a b18a in my crx, i dont seem to have clearance in installing it.. please post pics if can

 

''''

 

'''

 

what part are you not having clear? i have a b16 and i got a strut bar for a 92-95 hatch and it cleared great, i know when i had the one for the crx it rubbed on a vaccum fittin that came out of my intake manifold if thats that same thing thats hitting on yours try to get one for a hatch like i said.

 

strut bar? when did i say that? im having trouble with the front lower tie bar

 

With an engine swap I'm going to say your **** out of luck. Unless you want a front tie bar that is like an 1'' off the ground.

 

Personally, I wouldn't bother with a front tie bar. All you due is make your car harder to turn.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXRageD &raquo;</TD></TR><TR><TD CLASS="quote">Personally, I wouldn't bother with a front tie bar. All you due is make your car harder to turn.</TD></TR></TABLE>

I disagree - it made my car easier to turn. In my experience, alignment & tire selection have a bigger effect on required steering effort. No offense - I realize every car, and every setup is a little different.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nine0eight &raquo;</TD></TR><TR><TD CLASS="quote">strut bar? when did i say that? im having trouble with the front lower tie bar</TD></TR></TABLE>

In your original post, you did not mention if the tie bar in question was an upper or lower piece.
What brand of lower tie (arm) bar did you purchase?