Where can i get a 2.5" exhuast donut?
Thread Starter
Junior Member
Joined: Dec 2000
Posts: 526
Likes: 0
From: East Coast, nj, usa
Where can i get a 2.5" exhuast donut?
i got a DC jdm header w/ a 2.5" collector and i am having trouble finding a donut gasket. i also have a high flow cat w/ a 2.5" inlet w/ a N1 apex exhuast.
any help would be appreaciated
thanks
any help would be appreaciated
thanks
Collector-o-Guns and 
Drinker
DrinkerJoined: Jul 2000
Posts: 9,259
Likes: 1
From: Armed
Re: Where can i get a 2.5" exhuast donut? (SpeedRacer00-667)
http://www.itr-nc.com/pages/jdm_4.htm
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">The best source for the donut gasket is David Stadulis of SMS Products (540-2876384). Contact David directly for ordering information.
You can also find the gaskets at your local Acura or Honda dealer, but be prepared to pay a little more for them. Below are the part numbers:
Acura (from an early 90's Legend coupe) - 18229 SPO J51
Honda (from the S2000) - 18229 PCX 003
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">The best source for the donut gasket is David Stadulis of SMS Products (540-2876384). Contact David directly for ordering information.
You can also find the gaskets at your local Acura or Honda dealer, but be prepared to pay a little more for them. Below are the part numbers:
Acura (from an early 90's Legend coupe) - 18229 SPO J51
Honda (from the S2000) - 18229 PCX 003
</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Crisgo
All Motor / Naturally Aspirated
5
May 18, 2004 03:05 PM