new here, obviously. friend told me about the site. just wondering what everyones getting to the wheels and what times youre running... and of course what you have on.

ill be putting a h22 in next week, just waiting on delivery of the camgears before starting install.

i read in someones sig that they ran a 13.8 with just boltons. thatd be nice, although it seems too good to be true.

 

USDM H22A with I/H/E/Header/ cam gears/ pulleys / LSD 170 whp at 94 degrees F. Never ran at the track, but I'd probably run a 13.8! Don't believe the vendor hype. If I ran less than a 14.8 I would be surprised.

 

you would be surprised. I took my friend prelude with just an filter on the stick intake and a apexn1 exhaust toa 14.73 @96mph maybe your car is beat or somebody needs to learn how to drive

 

my dyno/track numbers in my sig... this is w/ h22a w/ lsd: 3" intake, 2.5" header back exhaust, dyno tuned v-afc. i ran the time in my sig w/ this motor in my 96 accord coupe that weighs 2970 w/ me in it.

 

nice times. when you got tuned did you have cam gears too or was it just the controller?

what kind of clutch and flywheel do you have?

 

no cam gears, only what i listed. ACT 6 puck clutch, their heavy duty pressure plate, and a resurfaced STOCK flywheel.

 

When I dynoed my Lude @11psi my #'s were: 273whp and 232 ft lbs of tq.
Best 1/4 mile time was a 14.02 @ 105mph with a 2.3 sixty foot.
The guy with an all motor JDM H22 that runs 13.8 is Preldeuracer023.

 

you were running 11 psi and only ran a 14? isn't stock 15.4 or somewhere around there?

 

see signature below.

 

somone help me out, I ran a 9.69 1/8 mile at 73 MPH.What is a rough estimate for a quarter mile time?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99redlude &raquo;</TD></TR><TR><TD CLASS="quote">somone help me out, I ran a 9.69 1/8 mile at 73 MPH.What is a rough estimate for a quarter mile time?

</TD></TR></TABLE>

9.7 (1/8 Mile) = 15.13 (1/4 Mile ) oh...... and i ran 14.7 with just i/h/e! i hope that helps you out

 

Not sure on 1/4 mile times or HP #'s on the new motor yet. I dynoed once on the new motor and made 285 or so on 4-6 PSI

Last motor made 328 HP and 254 TQ @ 9PSI....

Built H22
Custom Turbo Kit
Lots of goodies


Modified by TrboH22 at 10:18 PM 7/25/2003

 

damn, what do you have besides the normal stuff?

my goal in the end is to be about where you are. im still waiting to get skunk2 stage2 cams/springs/retainers/intake man. and im also considering a port&polish since the shop im getting all the work done at does them as well.

 

15.0@93 on my 92si with h22 swap with intake and open header.

 

i have a friend here in az that runs has hit 13.8 in his usdm 93 prelude vtec, with only bolt ons i dont remember his name on this board, i think its ALTERED4, but i know on PO.com he is speedrcr93