im trying to strip my b18c down to a bare block, but i dont have a crank pulley wrench. is there any way to remove the crank without a pulley wrench? jw. thanks.

 

Impact

 

i believe we tried an impact, and it turned the whole crank. should i spray it down with some liquid wrench and try again?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSb0y &raquo;</TD></TR><TR><TD CLASS="quote">i believe we tried an impact, and it turned the whole crank. should i spray it down with some liquid wrench and try again?</TD></TR></TABLE>

yes, and tap on it so that the liquid wrench sets into the bolt.

Dont be afraid to lay into it. That ****** is on there.

 

alright. also... i have this cylinder head i got, and its been sitting there for a while and accumulated some dust. how do i go about cleaning the dust off so i can use it again?

 

compressed air and lint free towels to clean the head. Also use something wedged inbetween the crank pulley and block to keep it from spinning. I always use a huge screwdriver. Although, thats on a chevy v8 that i did that one on. But it should work