jdm eg6 rear disc brake conversion, b16a short block
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Nov 2002
Posts: 11,076
Likes: 0
From: San Pedro, CA
jdm eg6 rear disc brake conversion, b16a short block
jdm eg6 rear disc brake conversion, excludes e-brake lines and lca's, needs new rotors and brake pads-$75:::::::::::: sold ::::::::::::::::
1st genB16a block, excludes oil pan, and inside of sleeves has minor rust, -$50
::::::::::::::::: sold :::::::::::::::::::
selling cheap because I want them out, will ship for $500 ea.
Modified by eg6ken22 at 7:27 AM 7/8/2003
Modified by eg6ken22 at 9:13 PM 7/8/2003
1st genB16a block, excludes oil pan, and inside of sleeves has minor rust, -$50
::::::::::::::::: sold :::::::::::::::::::
selling cheap because I want them out, will ship for $500 ea.
Modified by eg6ken22 at 7:27 AM 7/8/2003
Modified by eg6ken22 at 9:13 PM 7/8/2003
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Nov 2002
Posts: 11,076
Likes: 0
From: San Pedro, CA
Re: jdm eg6 rear disc brake conversion, b16a short block (drvfast)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drvfast »</TD></TR><TR><TD CLASS="quote">have any pics of this stuff?</TD></TR></TABLE>sorry no pics at the moment, just want to get this stuff out, thats why its up so cheap
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Nov 2002
Posts: 11,076
Likes: 0
From: San Pedro, CA
Re: jdm eg6 rear disc brake conversion, b16a short block (Vap133)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vap133 »</TD></TR><TR><TD CLASS="quote">bump for an honest seller.... 
</TD></TR></TABLE>thanks mang
</TD></TR></TABLE>thanks mang
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Nov 2002
Posts: 11,076
Likes: 0
From: San Pedro, CA
Re: jdm eg6 rear disc brake conversion, b16a short block (Grocery Getter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Grocery Getter »</TD></TR><TR><TD CLASS="quote">i think i want that block... hit me up.</TD></TR></TABLE>pming in process
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Nov 2002
Posts: 11,076
Likes: 0
From: San Pedro, CA
Re: (drunknbass)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by drunknbass »</TD></TR><TR><TD CLASS="quote">good doing buisness .</TD></TR></TABLE>thanks aaron for a honest buyer on time
for a honest buyer on time
Joined: Jul 2002
Posts: 757
Likes: 0
From: Rialto, CA, US
Re: (eg6ken22)
thanks,
the block is in bad condition, the block needs to be honed out a lot,
and someone has already tried to take it apart once
but it seems as if they had no idea what they were doing, looks like they tried to pry a lot of things apart instead of doing it the right way, lots of screw driver divits, good thing the rods and pistons are bad to begin with.
-tim
wtb: ctr overbore pistons.......
the block is in bad condition, the block needs to be honed out a lot,
and someone has already tried to take it apart once
but it seems as if they had no idea what they were doing, looks like they tried to pry a lot of things apart instead of doing it the right way, lots of screw driver divits, good thing the rods and pistons are bad to begin with.
-tim
wtb: ctr overbore pistons.......
Thread
Thread Starter
Forum
Replies
Last Post
1991civicd16z6
Northern California (Sales)
2
Oct 29, 2008 07:15 PM
djmarvelous1
Northern California (Sales)
32
Jun 24, 2005 08:01 AM
