FS: ITR Valvesprings, Portflow retainers, Ferrera Valves
Thread Starter
Junior Member
Joined: Dec 2001
Posts: 278
Likes: 0
From: Jacksonville, FL, USA
FS: ITR Valvesprings, Portflow retainers, Ferrera Valves
A few things to sell..
Portflow Titanium Retainers.
They were used for approx. 3k miles and they have a few small barely visible scratches on the top from removal. Nothing nearly able to cause any effect or weaken structure.
$100 obo shipped
http://www.imagestation.com/pi...9.jpg
<U>ITR Valvesprings</U>
I have two sets of these; one used for approx. 9k miles and the other approx. 3k miles. You can still see the yellow and blue tops of the springs.
$200 obo shipped (each set)
http://www.imagestation.com/pi...1.jpg
http://www.imagestation.com/pi...7.jpg
http://www.imagestation.com/pi...e.jpg
<U>Ferrera Stainless Steel Valves</U>
They were used for 75miles. Yes, only seventy-five miles. I removed them because I am buying another fully built head with valves already assembled in it. There are some carbon deposits on the valves; most cleaned off tho. They are not oversized either.
$300 obo shipped
http://www.imagestation.com/pi...b.jpg
http://www.imagestation.com/pi...d.jpg
I also have a few other things...
https://honda-tech.com/zerothread?id=524571
If you have any questions or need more pictures, send me and IM or email at azndav83@aol.com
Portflow Titanium Retainers.
They were used for approx. 3k miles and they have a few small barely visible scratches on the top from removal. Nothing nearly able to cause any effect or weaken structure.
$100 obo shipped
http://www.imagestation.com/pi...9.jpg
<U>ITR Valvesprings</U>
I have two sets of these; one used for approx. 9k miles and the other approx. 3k miles. You can still see the yellow and blue tops of the springs.
$200 obo shipped (each set)
http://www.imagestation.com/pi...1.jpg
http://www.imagestation.com/pi...7.jpg
http://www.imagestation.com/pi...e.jpg
<U>Ferrera Stainless Steel Valves</U>
They were used for 75miles. Yes, only seventy-five miles. I removed them because I am buying another fully built head with valves already assembled in it. There are some carbon deposits on the valves; most cleaned off tho. They are not oversized either.
$300 obo shipped
http://www.imagestation.com/pi...b.jpg
http://www.imagestation.com/pi...d.jpg
I also have a few other things...
https://honda-tech.com/zerothread?id=524571
If you have any questions or need more pictures, send me and IM or email at azndav83@aol.com
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
bokals
For Sale
1
Oct 11, 2009 11:31 PM
ITR9788
Classifieds: Forced Induction
2
Nov 19, 2003 12:56 PM