i have a apexi RSM installed in my CRX EE8 (european EF8, B16a1 powered)

because of the smaller diameter of my wheels/tires (195/45/15 on a superleggera) i had to adjust the diameter on 94%

when i monitor the speed i can push down to display the top speed driven so far. if i reset the top speed and accelerate the two digits (current speed and top speed driven so far) should be the same! but they're not?!

why? the digit that shows top speed driven so far is always 5-6 km/h ahead?!
first i thought it's because of the 94% and only the current speed digit is corrected by the 94% input but not the "top speed driven so far"

but if i change the 94% to 120% or any else it always stays the same?

any ideas on that?

thanx

greets from switzerland
Jones

 

that's because it's showing you the top speed at what it would be if you had it set at 100%.

 

no it's not that! because if i adjust it to 120% instead of 94% it still is about 5-6 km/h ahead...

i've read the manual today... maybe it has something to do with the g-sensor. i will reset it and then we'll see!

 

do you have the weight of the car as close as you can in the init.?

 

yes. weight ist about 1020 kg

 

i'm bringing this post back to life!

i configured 94% (tire diameter)



look at the peak speed! 197 km/h. that was in the 4. gear!
but when i stopped to accelerate it was about 8500 rpm and 192 km/h

has anybody an explenation why the peak speed and rpm is ahead of that what's the apexi displays while driving?!

thanx

Jones


Modified by Jones at 12:27 PM 10/23/2003