I have a fourth gen and I have upgraded to the VTEC models brakes (11.1"). I am considering getting a set of Rota Circuit 8's for autocrossing. Anyways, the clearence looks pretty tight on the stock alloys and I was wondering if anyone knows if I would have a clearence problem. I have considered a 16" size but it doesn't look like azenis are made in a 16" size that would work well with my application. Also, mainting the stock 15*6.5 help me stay in stock class. Thanx for any help
-Mike-

 

back from the dead for info

 

just select offset for the vtec model. you should not have a problem.

 

do you know what is the prelude vtec wheel offset by chance? by the way my car is a eh2 not a prelude, i notice i'm in the prelude forum.





Modified by eh2 at 11:27 PM 2/8/2007

 

Anybody know if they will swap with the legend caliper mod?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eh2 &raquo;</TD></TR><TR><TD CLASS="quote">do you know what is the prelude vtec wheel offset by chance? by the way my car is a eh2 not a prelude, i notice i'm in the prelude forum.

Modified by eh2 at 11:12 PM 2/8/2007</TD></TR></TABLE>

The 4th gen prelude wheels had a very high offset. I believe it was either 50 or 52. I know for a fact that the rota slipstream fits, but I don't know about the circuit 8. You have to make sure that spokes don't rub against the brake caliper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hu &raquo;</TD></TR><TR><TD CLASS="quote">Anybody know if they will swap with the legend caliper mod?</TD></TR></TABLE>

Not really sure what you are asking. When you say "they" are you referring to the stock prelude caliper??

 

Thanks