Need Advice on a Deck/Amp/Front and Rear Component Setup
Thread Starter
Joined: Aug 2002
Posts: 2,209
Likes: 0
From: somewhere in INGLEWOOD chillin in tha hood, CA
Need Advice on a Deck/Amp/Front and Rear Component Setup
Im going to explain this thoroughly......
I currently have a a good pioneer deck(i think 6300 with the picture screens and mosfet internal amp)..... and i also have a set of Rockford Fostgate fanatic X 6.5 components from my old car, and i brand new fosgate 100a2(25x2@4ohns, 50x2@2ohns) amp sitting around....... Now i need all new speakers kuz the ones in the car are blown.......
im looking to buy a nice set of components in the 200-300 dollar range, im looking at MB Quart, POLK, FOCAL, JL audio, Boston acoustic pro, diamond audio...etc .
1)Now can i run the fosgate components in the rear and one of the above components on the front and run everything in parralel on the 100a2 amp, so i am pushing 50x2@2ohms?? will that be too much for that small amp pushing 2 component sets?? and will i loose my control with fading , balance, etc.??
2) run the front components off the amp at 25x2@4 ohms or 120x1@2ohms with the front componets ran in parrallel, and the rear component off the pioneer deck with the mosfet internal amp(thats a stong internal amp)
3)just buy a 4 channel amp in the 250 dollar range and run them all off the 4 channel amp?? if so what GOOD 4 channel amp can i get for that price either 35x4 or 50x4??
as u can see i am trying to squeeze what i can out my current set up and not by another amp, since i got the fostgate amp for free....or will i be pushing that amp too much and sacraficing sound quality?? since i do care bout weight and im pulling the back seat, im not running subs....so i want as much bass or mid bass out of my components, so im guessing dynamating the doors and rear deck will help?? also what front components will give me good bass with an amp??
sorry the post was long but i wanted to make it clear on what ideas im toying with, any help would be appreciated
I currently have a a good pioneer deck(i think 6300 with the picture screens and mosfet internal amp)..... and i also have a set of Rockford Fostgate fanatic X 6.5 components from my old car, and i brand new fosgate 100a2(25x2@4ohns, 50x2@2ohns) amp sitting around....... Now i need all new speakers kuz the ones in the car are blown.......
im looking to buy a nice set of components in the 200-300 dollar range, im looking at MB Quart, POLK, FOCAL, JL audio, Boston acoustic pro, diamond audio...etc .
1)Now can i run the fosgate components in the rear and one of the above components on the front and run everything in parralel on the 100a2 amp, so i am pushing 50x2@2ohms?? will that be too much for that small amp pushing 2 component sets?? and will i loose my control with fading , balance, etc.??
2) run the front components off the amp at 25x2@4 ohms or 120x1@2ohms with the front componets ran in parrallel, and the rear component off the pioneer deck with the mosfet internal amp(thats a stong internal amp)
3)just buy a 4 channel amp in the 250 dollar range and run them all off the 4 channel amp?? if so what GOOD 4 channel amp can i get for that price either 35x4 or 50x4??
as u can see i am trying to squeeze what i can out my current set up and not by another amp, since i got the fostgate amp for free....or will i be pushing that amp too much and sacraficing sound quality?? since i do care bout weight and im pulling the back seat, im not running subs....so i want as much bass or mid bass out of my components, so im guessing dynamating the doors and rear deck will help?? also what front components will give me good bass with an amp??
sorry the post was long but i wanted to make it clear on what ideas im toying with, any help would be appreciated
Thread
Thread Starter
Forum
Replies
Last Post