i would have posted this in tech, but i know that the road racing guys always seem to know who has blank rotors on sale this week.

thanks for the help guys

 

nopi carries brembo blanks

to avoid shipping i always go to autozone tho, since rotors are disposable

 

cool thanks. mine are just getting warped

 

don't waste your money on brembo....get the cheapo autozone or advanced rotors for under 29 apiece!!!!

 

5-lug application

https://honda-tech.com/zerothread?id=181692

 

What Chad said. I use NAPA rotors at about $24 per. They're disposable, so don't waste good money on rotors.

 

Last time I bought from Nopi a couple months ago they were under $28 each for the GSR front, and the price had just gone up. Shipping raised the cost a bit though, but not that bad since I didn't pay taxes.

 

I bought mine at Summit. Price was very competitive.

 

Just bought some from nopi. $24 for the front and $23 for the rear. Shipping was only $14 for all four. Just my $.02.

 

I just used Autozone rotors for my car. $20 a piece.


Modified by 96 SOHC VTEC at 10:38 PM 6/13/2003

 

Bought a pair from KVR for a GSR, I think it was about $50 for the pair. Picked them up since they are local. They do drill/slot/whatever like powerstop and advertise in most mags.

 

Brembo blanks are $28-29 Front and $24-26 rear (g3 Tegs) and about $1 more for ITRs. Call Colletti Motorsports or visit ImportHorizon.com which I think is a little cheaper. You do pay through the nose for shipping though. Usually $15 for a pair because rotors just weigh a lot.

 

I meant ImportReplacementParts, here's the link. The Brembo rears are actually $22.

http://www.importrp.com/acura_rotors.htm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad &raquo;</TD></TR><TR><TD CLASS="quote">don't waste your money on brembo....get the cheapo autozone or advanced rotors for under 29 apiece!!!!</TD></TR></TABLE>

do you RR guys have issues with them cracking under high heat? That's the only thing I wory about and the reason I go with brembo rotors. TIA

Colletti is really cheap and if you get 4 shipping is only $30. I think i paid $29 F and like $25 rear.

s

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tunes12 &raquo;</TD></TR><TR><TD CLASS="quote">Shipping was only $14 for all four. </TD></TR></TABLE>


Nice price on the shipping. I cant stand dishonest companies that have low prices and make up the $$ through ridiculous shipping charges *cough cough colleti @ $10/pop cough*

 

Tunes12: What kind of rotors did you buy from Nopi?

 

what are some good low dust daily driver pads?!?!??!

 

Hawk HP Street, don't get Hawk HP+. I have them and they dust like crazy, but once they are warm they bite down hard!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEConly &raquo;</TD></TR><TR><TD CLASS="quote">Tunes12: What kind of rotors did you buy from Nopi? </TD></TR></TABLE>

I bought brembo blanks, front and rear, for a 95 si. $24 and change for the front, $22 and change for the rears, $14 for shipping for all four to CT. Not bad in my opinion. Shipping took like 3 days or so.

 

and they came in the red brembo boxes? cool. I 'll go to their web site now..

 

Nopi Electronic catalog on their web site only has cross drilled & slotted Brembo rotors and they 're way too expensive to begin with (like $75+ ea.!) No solid/blank Brembos for Integras.

 

Blah just checked out nopi.com and I dont see any rotors for my 00 Si anymore. I thought I saw them on there a few months ago...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by siisgood00 &raquo;</TD></TR><TR><TD CLASS="quote">Blah just checked out nopi.com and I dont see any rotors for my 00 Si anymore. I thought I saw them on there a few months ago...</TD></TR></TABLE>

Cobalt has nice blanks for the EM1's, i don't remember how much they cost but they're close to Brembo's cost.

 

EM1's?

 

Si