Used ACT HD 6 Puck Race Clutch, 1st gen B16a Intake Mani & TB (bare)
Thread Starter
Junior Member
Joined: Feb 2002
Posts: 815
Likes: 0
From: Gresham/Corvallis, Or, United States
Used ACT HD 6 Puck Race Clutch, 1st gen B16a Intake Mani & TB (bare)
like the topic says i have a HD ACT 6 puck race clutch for any first gen b16a tranny( for 88-91 JDM B16a trannies about 6k MILES). nothing wrong with the clutch just going ys1 so i need a new disk so i might as well get an all new clutch setup. so let me know if you are interested and email me with any offers. at Rowdyboy21@hotmail.com
ALSO: i have a STOCK B16a clutch and pressure plate. it came with a first gen b16, has never been used in the states.... b16 came from HMO also let me know if you need that too
Make offers on the edit: 2000 B16a manifold im pretty sure its bare i have a 1st gen TB for it too but the pulley is gone. i have parts of a 00 si pulley that should work. again email me if you are interested
Modified by jdmDXrex at 12:03 AM 6/9/2003
ALSO: i have a STOCK B16a clutch and pressure plate. it came with a first gen b16, has never been used in the states.... b16 came from HMO also let me know if you need that too
Make offers on the edit: 2000 B16a manifold im pretty sure its bare i have a 1st gen TB for it too but the pulley is gone. i have parts of a 00 si pulley that should work. again email me if you are interested
Modified by jdmDXrex at 12:03 AM 6/9/2003
Thread
Thread Starter
Forum
Replies
Last Post
clarkekent13
Transmission & Drivetrain
1
Feb 7, 2010 04:27 PM
