As title says: DC Sports 4-2-1 Stainless Steel 1-piece header. Will bolt right on a Type R (and possibly a B18B non-vtec motor), slight muffler modification is needed for a GSR.

No dings. Physically the header is perfect. It has turned to a gold coloring like most other SS headers do and there are only a few small blemishes in the SS finish.

$225 and I'll split UPS ground shipping charges with you. Will post pictures later tonight when I get home. IM me or post your questions here.

 

Also, I saw a dyno of this header on a ITR. There was a decent amount of torque picked up in the midrange and a few HP up top. You'll also save roughly 25lbs over the stock manifold.

 

Here's a few pics of the header. I have not cleaned anything up and this will probably show in the pics. However, some elbow grease should have it looking like new, except for the gold tint that will probably be hard to get off.

 

 

This will fit a 95 LS, correct?

 

From what I have heard, it should bolt right on a 95 LS. However, I don't want to guarantee something other than it will fit perfectly on an R.

BTW--had a few people flake on me, so I listed it on ebay:

http://cgi.ebay.com/ebaymotors/aw-cg...453762&r=0&t=0