Acura Integra All Integra Except ITR

Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

Thread Tools
 
Search this Thread
 
Old May 19, 2003 | 07:18 PM
  #1  
quickcrx38's Avatar
Thread Starter
 
Joined: Jan 2003
Posts: 9
Likes: 0
From: Alexandria, VA, USA
Default Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

I think I've just been scammed by a guy in SF by the name of Brian Wong. He always insists on being paid up front, then sends some shady stuff. I paid for a 99 JDM ITR swap in January. When I finally got the shipment, it did not have an ITR Trans. It had an s80. Which could be either an ls or gsr trans. Worth about a grand less than what I paid for. He insisted I send it back before he sent me the right trans. Reluctantly, I did it. Now, it is the middle of may. I still have no transmission for the swap I paid for in January, and he won't return emails, phone calls or IM's. If anyone has any information on how I can get in touch with him, please let me know. Also, depending on how this is handled, I may be leading a lawsuit against Brian and his "business". Anyone else who would like to jump on board let me know.
Reply
Old May 19, 2003 | 07:30 PM
  #2  
b18c1_powered_si's Avatar
Honda-Tech Member
 
Joined: Feb 2000
Posts: 6,840
Likes: 0
From: SF Bay Area, CA
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

u could call it what u like. i had trouble locating the inner casing. in order to get the trannie back to u. i was told this will be done this week. but then my friend lag on me as well. your abusive e-mails and foul languaged led me not to answer your e-mails anymore. i haven't scam anyone and wont bother scamming u. i am on here everyday. i took back a trannie from a motor swap that had gone out a couple of months later. i'm sure a few folks can vouch for me. the delay was due to me not able to locate the proper part for u. i could have not even bother taking the trannie back. but like i said i chose to. but your patience ran out. and i got tired of your abusive e-mails once again. when u have your trannie that will be the end of this story.
Reply
Old May 19, 2003 | 07:40 PM
  #3  
ragejed's Avatar
Honda-Tech Member
 
Joined: Apr 2002
Posts: 3,626
Likes: 0
From: .
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

I can vouch for him!, Stand up guy
Reply
Old May 19, 2003 | 07:40 PM
  #4  
hurleyboarder21's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 255
Likes: 0
From: Mill Creek, WA
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

aight, quickcrx, u need to chill, im sure u will get your stuff that u paid for, brian has made many transactions and has tons of positive feed back. i have done tons of research and talked to people who have done deals with brian, and i have chosen to buy a swap thru him because of all the positive feed back. also, im sure all the abusive language u used did not help the situation... so chill, sit back, and have some
Reply
Old May 19, 2003 | 07:41 PM
  #5  
Danger's Avatar
Honda-Tech Member
 
Joined: Aug 2002
Posts: 12,100
Likes: 0
From: Stockton, CA. 209
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

i have bought and sold parts w/ brian for around 2.5 years now . i have never had a problem with anything . i would not hesitate to by anything from him in the future
Reply
Old May 19, 2003 | 07:41 PM
  #6  
F1Spec's Avatar
 
Joined: May 2002
Posts: 10,128
Likes: 0
From: bay area
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

I think you should talk to him directly before making such a post on here.
He does legit business and I've bought parts that cost total around ~$5500 from
him and never have problem. He's not the type of guy that scam people. He does legit business.

I am sure there are other people on there that can vouch for Brian.
Reply
Old May 19, 2003 | 07:42 PM
  #7  
jsalicru's Avatar
Junior Member
 
Joined: Jun 2002
Posts: 140
Likes: 0
From: Murrieta, CA
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

Hmm.. outta all that Ive bought from Brian, Ive never had that issue... it look long to get my ITR long block but thats because he didn't have one... which he told me before hand... so I already knew it was gonna take long... Im sure there has just been some type of miss communication here...
Reply
Old May 19, 2003 | 07:43 PM
  #8  
zilverz's Avatar
Honda-Tech Member
 
Joined: May 2002
Posts: 2,149
Likes: 0
From: Jacksonville, FL
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

Brian has brought a lot of business oppurtunities to HondaTech .. I personally have had 2 successful transactions with him. He is one of the few people I would trust doing a multi-thousand dollar deal with. Fear not, mr 6 posts, I am sure Brian will come through with a little patients
Reply
Old May 19, 2003 | 07:44 PM
  #9  
Gee3's Avatar
Honda-Tech Member
 
Joined: Mar 2000
Posts: 1,690
Likes: 0
From: Formerly of SF moved to DFW and now back in SF, CA, USA
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

I can vouch for Brian. He's sold me stuff and sent it in a timely manner and also helped install my first LSD tranny. I'm sure Brian will take care of you.

Reply
Old May 19, 2003 | 07:44 PM
  #10  
eddiecut's Avatar
Honda-Tech Member
 
Joined: Apr 2002
Posts: 4,389
Likes: 0
From: oregon yO
Default Re: Anyone know how to get in touch with Brian Wong (b18c1_powered_si)

i know brian and hes no crook, he told me about this tranny deal at one point, ppl make mistakes thas life. i know hell get you your stuff but being stupid and sending abusive emails wont help things, iam sure youll get your stuff
Reply
Old May 19, 2003 | 07:48 PM
  #11  
not so civic's Avatar
Honda-Tech Member
 
Joined: Jun 2001
Posts: 4,712
Likes: 1
From: gravity rides everything...everything will fall, se GA/ne FL
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

doubtful that he has any scammer in him. he's all about straight up buisness. no jacking around. i sent him 1200+ dollars today. i order good bit of parts from brian...and always get what i order. two plus years, no probs.


Modified by not so civic at 5:12 AM 5/20/2003
Reply
Old May 19, 2003 | 07:48 PM
  #12  
b18c1_powered_si's Avatar
Honda-Tech Member
 
Joined: Feb 2000
Posts: 6,840
Likes: 0
From: SF Bay Area, CA
Default Re: Anyone know how to get in touch with Brian Wong (eddiecut)

it took him 6 weeks to finally decide if he would let me pay for fedex to come pick up the trannie. and 3 pick up attempts before it was finally picked up. it took me about a month to locate a good inner casing. plus i bought new 4.78 parts and paid a friend to fix the trannie. i have a few folks that know about this situation. and can back me on it.
Reply
Old May 19, 2003 | 07:52 PM
  #13  
marltonteg's Avatar
 
Joined: Feb 2003
Posts: 782
Likes: 0
From: exit 4, jersey
Default Re: Anyone know how to get in touch with Brian Wong (not so civic)

ive heard nothing but good things about brian and his reputation...
Reply
Old May 19, 2003 | 07:58 PM
  #14  
AmauryR's Avatar
Honda-Tech Member
 
Joined: Nov 2001
Posts: 572
Likes: 0
From: East Coast
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quickcrx38 &raquo;</TD></TR><TR><TD CLASS="quote">I think I've just been scammed by a guy in SF by the name of Brian Wong. He always insists on being paid up front, then sends some shady stuff. I paid for a 99 JDM ITR swap in January. When I finally got the shipment, it did not have an ITR Trans. It had an s80. Which could be either an ls or gsr trans. Worth about a grand less than what I paid for. He insisted I send it back before he sent me the right trans. Reluctantly, I did it. Now, it is the middle of may. I still have no transmission for the swap I paid for in January, and he won't return emails, phone calls or IM's. If anyone has any information on how I can get in touch with him, please let me know. Also, depending on how this is handled, I may be leading a lawsuit against Brian and his "business". Anyone else who would like to jump on board let me know.</TD></TR></TABLE>

Dude, calm down a bit - I've dealt alot with Brian and I can vouch that he's legit, and I know a lot of other people can vouch for him also, don't worry about being done wrong or mislead. If he insists on being paid up front, thats how he does his business- I mean I wouldn't just up a dohc vtec head because someone gives me $100 bucks and I gotta wait for the rest, I'll get the full ammount and then do the exchange evenly, 'ya know?[for example]. Also he mentions he has to get the inner housing, not everyday someone just has an inner housing for a hydro b-series just laying around, and then it'll take time to install everything together, its not really something you rush, unless you want someone to hand you a tranny bolted together with loose bearings bolts and misc parts. I'm not trying to come out as an ***, but just calm down and have a lil patience.
-l8r
Reply
Old May 19, 2003 | 08:01 PM
  #15  
UnionCity LS's Avatar
 
Joined: Jan 2003
Posts: 1,206
Likes: 0
From: UnionCity California
Default Re: Anyone know how to get in touch with Brian Wong (Death Scythe)

well quickcrx38..i dont know brian...but it sounds like there are a **** load of people that do...and your gettin Own3d...hahahah
Reply
Old May 19, 2003 | 08:11 PM
  #16  
chet's Avatar
Honda-Tech Member
 
Joined: Sep 2002
Posts: 4,441
Likes: 1
From: 20% stronger
Default Re: Anyone know how to get in touch with Brian Wong (UnionCity LS)

christ, not again.

brian does not **** around...end of story. he is honest and his products are excellent.
Reply
Old May 19, 2003 | 08:33 PM
  #17  
tonyxcom's Avatar
 
Joined: Jan 2002
Posts: 11,548
Likes: 2
From: Vallejo, CA
Default Re: Anyone know how to get in touch with Brian Wong (chet)

I think if you brought a lawsuit against Brian, you would be by yourself. If he was trying to scam you, why did he send you a swap in the firstplace? And then why would he try to scam you out of a "1000 dollar less" tranny? If you were as beligerant as Brian claims, I wouldn't talk to you either.

Brian is 100% standup.

Buy your next swap from http://www.jdmclub.com
Reply
Old May 19, 2003 | 08:41 PM
  #18  
jdmspoonitr's Avatar
Honda-Tech Member
20 Year Member
iTrader: (1)
 
Joined: Apr 2002
Posts: 5,326
Likes: 1
From: with my Benelli :)
Default Re: Anyone know how to get in touch with Brian Wong (tonyXcom)

Brian is a good guy. I know how seriously he takes his business. He would do nothing to hurt his reputation or someone else's pocket. You need to chill out. Obviously you don't know how to do business if your only way of communicating is by cussing at the guy. Brian is the only private seller I would trust with large amounts of cash. And for the statement about how he wants a full deposit first. What did you think? 20 bucks down for a complete swap? This is how the business is run, if you can't handle that, then go buy **** from the dealer and get ripped off.
Reply
Old May 19, 2003 | 08:48 PM
  #19  
evilxkid's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 866
Likes: 0
From: sunvalley / reno, nevada, usa
Default Re: Anyone know how to get in touch with Brian Wong (tonyXcom)

i would have to say brian is the most honest of all the people i have done buisnus with. i buy parts from him even if i can get them some where cheeper just because i trust him. he's no scammer
Reply
Old May 19, 2003 | 08:51 PM
  #20  
ProJectCvic's Avatar
Member
 
Joined: Dec 2002
Posts: 2,497
Likes: 0
From: Midwest, USA
Default Re: Anyone know how to get in touch with Brian Wong (quickcrx38)

Brian is one of the trustworthest guy around. Very helpful and very easy to work will. I think he is one of those guys i, as well as you, can trust with big ticketed items. You most definitely will get what you paid for.
Anthony
Reply
Old May 19, 2003 | 08:58 PM
  #21  
4DeepCivic's Avatar
Honda-Tech Member
 
Joined: Jan 2002
Posts: 544
Likes: 0
From: Bay Area, CA, USA
Default Re: Anyone know how to get in touch with Brian Wong (jdmspoonitr)

I know for a fact Brian is no scammer. Like what Tonyxcom said.. You're *** will be alone in your lawsuit. He's a legitamate, and he doesn't sell crap. If you don't get your stuff right away, he has a good reason. All you have to do is talk to him. Brian backs up the parts he sel. You better tone down your crap, and communicate with people properly.
Reply
Old May 19, 2003 | 08:58 PM
  #22  
blackANESE's Avatar
Honda-Tech Member
iTrader: (2)
 
Joined: Dec 2001
Posts: 6,494
Likes: 0
From: Phoenix
Default Re: Anyone know how to get in touch with Brian Wong (tonyXcom)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tonyXcom &raquo;</TD></TR><TR><TD CLASS="quote">Buy your next swap from http://www.jdmclub.com</TD></TR></TABLE>

Go here

nothing but for Brian here
Reply
Old May 19, 2003 | 08:59 PM
  #23  
MachAF's Avatar
Honda-Tech Member
 
Joined: May 2001
Posts: 2,477
Likes: 0
From: MSP
Default Re: Anyone know how to get in touch with Brian Wong (ProJectCvic)

I can vouch for Brain too. One of the many many on this board!! good guy!
Reply
Old May 19, 2003 | 09:30 PM
  #24  
threatcon13's Avatar
New User
 
Joined: Jul 2001
Posts: 6,380
Likes: 0
From: city of angels, CA, USA
Default Re: Anyone know how to get in touch with Brian Wong (MachAF)

brian is fair and trustworthy. excellent person to do business with. and it looks like youre gonna get your tranny, so don't bring this ish up anymore.
Reply
Old May 19, 2003 | 09:30 PM
  #25  
Peter K's Avatar
New User
 
Joined: Jun 2001
Posts: 2,539
Likes: 0
From: Windsor, CT
Default Re: Anyone know how to get in touch with Brian Wong (MachAF)

i talk to brian like everyday.. and he is a really cool guy. he won't take your money.
Reply



All times are GMT -8. The time now is 06:30 PM.