Hi Guys,

I did my valve adjustment on Saturday at a pals pad.
I noticed that on my JUN crate the it had been a little loud lately so I figured it was time again.
I found that all the intake side was tight and the exhaust was loose.
I set it to 7 intake and 8 exhaust.
I was wondering if any of you JUN users were running it more loose on the exhaust side.
The car is a hell of a lot more quiet and seems more snappy, but was curious to see what you guys were doing.
I was wondering if JUN runs the exhaust side looser to account for expansion.

Thanks for any help/feedback,

Paul

 

I normally run the tighter spec, I know that I am due for a lash adjustment as my motor sounds like a diesel with all the ticking