im hooking up the zex n20 kit on my civic dx 96 and need to know which wire to hook up the white wire to on the throttle position sensor. i have an safc hooked up so could i just hook up the wire wire from the zex box to the gray wire on the safc?

prose

 

the wire that gives you 5 v when you open the plate. stick your key in the ignition and test the wires for voltage. the solenoid needs 5v to activate.

 

Quick instructions:

Open Garbage can.
Dump.

 

thats just the thing, i dont have a volt meter. the wire has to be the same on all hondas or at least all civics. I dont understand why the wire going to the safc wouldnt work, because it read how far the throttle is open

prose