Garrett GT30 and GT25 FS
Thread Starter
Honda-Tech Member
Joined: Aug 2001
Posts: 517
Likes: 0
Garrett GT30 and GT25 FS
Hi guys,
I have for sale the following, a Garrett GT30 rated at 600 HP with a t3 flange (4 bolt as all Ball bearing Garretts have this).
The other is a Garrett GT25 rated at 450 HP with a 25 flange, this one comes with an internal wastegate, but you can run an external one if u weld the gate closed.
Im not sure what im after for them, but they are both brand new and in box, still sealed. I guess IM me offers
I have for sale the following, a Garrett GT30 rated at 600 HP with a t3 flange (4 bolt as all Ball bearing Garretts have this).
The other is a Garrett GT25 rated at 450 HP with a 25 flange, this one comes with an internal wastegate, but you can run an external one if u weld the gate closed.
Im not sure what im after for them, but they are both brand new and in box, still sealed. I guess IM me offers
Thread Starter
Honda-Tech Member
Joined: Aug 2001
Posts: 517
Likes: 0
Re: Garrett GT30 and GT25 FS (ARunto)
if u read, both are new.
the specs of the GT30 are:
Housing a/r =0.70
Wheel Trim on compressor side is = 64
Wheel Diameter 2.41/3.22
rated at 600
Compressor Flow= 65
EXHAUST SIDE
Housing A/R 1.06
Wheel Trim= 84
I have had offers for the GT25 at 1,000 USD
The GT30 has offered 1,200 USD
thank you for all the enquiries
the specs of the GT30 are:
Housing a/r =0.70
Wheel Trim on compressor side is = 64
Wheel Diameter 2.41/3.22
rated at 600
Compressor Flow= 65
EXHAUST SIDE
Housing A/R 1.06
Wheel Trim= 84
I have had offers for the GT25 at 1,000 USD
The GT30 has offered 1,200 USD
thank you for all the enquiries
Thread
Thread Starter
Forum
Replies
Last Post
BoBaFreak
Southern California (Sales)
1
Dec 3, 2008 07:25 PM
Project X
Classifieds: Forced Induction
2
Jul 5, 2008 07:20 AM
