hey guys,
im thinking about changing my interior trims...
i just dont wanna paint them and mess up
obviously, real cf is really expensive,
but how about the carbon fiber vinyl sheet?
they are like $20 for 4feet...
is there anybody used it?

 

bleh, why...WHY!

 

just money short...
the previous owner painted the whold interior and its terrible.. really..
if i paint again, i am 100% sure that mine will be worse than now matter of time..

any ideas?

 

dude...do not do the ricey vinly cf. thats whorrible. lol. hmm...get a good interior paint, soak/wash the paneling and stuff with simple green, get red or gray scotch brite pads, go over everythign with them, and paint. make sure you have good ventilation and proper breathing apparel. should only cost you like 30 bucks for everything...

 

Forget carbon fiber vinyl sheet. Go to a Fabric shop and pick up the colors that you want in vinyl it is relatively cheap and use that to redo the interior. Take your time it looks clean when done right.

 

ok guys..
forget about the cf vinyl junk..
but, can somebody show some restored interior pictures without big money?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by neoburi &raquo;</TD></TR><TR><TD CLASS="quote">ok guys..
forget about the cf vinyl junk..
but, can somebody show some restored interior pictures without big money?
</TD></TR></TABLE>

try the junkyard for unpainted OEM parts.

 

Ghey

 

just use the paint stripper to take out all the old paint, if the plastic is fuwked just paint it again with flat black paint.

 

That vinyl sheet stuff doesnt even look like CF, it looks like a shitty checkboard.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chad174 &raquo;</TD></TR><TR><TD CLASS="quote">dude...do not do the ricey vinly cf. thats whorrible. lol. hmm...get a good interior paint, soak/wash the paneling and stuff with simple green, get red or gray scotch brite pads, go over everythign with them, and paint. make sure you have good ventilation and proper breathing apparel. should only cost you like 30 bucks for everything...</TD></TR></TABLE>


i couldnt agree with him more, if all you can do is paint it then do it, its really not that hard, replacing the panles and most likely the dash can get very pricy, so just make sure you take your time and do it right, GOOD LUCK

 

i might be selling the interior of a crx....and my buddy is.....check ebay or honda classifieds. or you could just repaint the whole interior, just take your time and it will look great, i promise. paint quality is 99% prep, 1% paint

 

I re did mine, from this





All the pieces are the same, except the shifter

 

WTF.. that is sooooooooooooooooooooooo nice!!!
did you just clean, spray, clear coat?
unbelievable... but.... i dont think i can do that.. i might try, but will be messed up..
thanks guys, really apreciate!!
and, i will not try the junk vinyl.. dont worry

 

I cleaned it and used paint stripper, which if I ever have to do it again I will not use paint stripper. It just causes more bad then good. I sanded the rough spots, then I spray painted it. I did not use any clear coat.

 

looks like ***

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by robbieshonda &raquo;</TD></TR><TR><TD CLASS="quote"> looks like ***</TD></TR></TABLE>

What does ? The before and after pics look like *** ? The interior looks stock so how can it look like *** ?

 

It's your car..do what makes you happy

 

i will try to clean up the car this weekend..
not painting but im gonna get rid of the shitty paint from my interior..
wish me luck!!!