LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ...
Thread Starter
Honda-Tech Member
Joined: Sep 2000
Posts: 1,176
Likes: 0
From: ATL
LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ...
My prices may be high and I apologize, point out why I'm high and maybe I'll give it to you for what you want, I can't keep up with every price. Still not interested in lowballers AT ALL, and im in no hurry to sell, so yes I may wait for the best offer. Thanks guys! BTW: I have people to vouch.
ARP Headbolts for GSR/TypeR/LSVTEC only torqued down ONCE
$75obo
LS VTEC Oil Line built my myself. has -6AN Stainless steel high pressure hose, BSPT Fittings on both ends to do it the RIGHT way. also has blocks to connect stock fuel presure switch and external oil pressure guage.
$65
b20 block bought with 57 miles, put on 2200, now has ~2257 and a cracked sleeve. Will include crank, mains, bearings fitted to 0.15" on 1,2,4,5 and 0.0017" on 3, can check yourself with plastigauge or whatnot. Also includes Reworked (per ENDYN) oil pump, water pump, all NEW seals, even after I bought it, i replaced every seal. Never decked, entire block deburred on the outside and in.
$400obo
RC 310CC injectors for OBD1+ (Saturated?) will work on any car without a resistor box.
$200obo
Moroso Catch Can with 2 endyn block Breather Nipples, hose, and filter to go with it. Has minor ding in the bottom of it from removing the engine.
$50
90-93 Integra California Car cover Storm Weave. Has a small hole from removing when frozen to the car (on the hood). Other than that its real clean and only used a few times. Fits like a dream.
$75
Notice shiny tape covering minor tear...
Autometer Ultralight Oil pressure guage with a BRAND NEW Custom 6' stainless steel oil feed line instead of the hazardous nylon line.
$50
b20b Throttle body with sensors only 57miles
Best Offer
b20 rods/rings/pistons with only 57 miles in perfect shape
$50
b16a Intake Manifold and Throttle Body and fuel rail with Fuel pressure regulator
$100
DOES NOT include injectors...
ADDED:
b18a Alternator and Starter
make offer
Modified by stizzit at 5:16 AM 6/16/2003
Modified by stizzit at 5:17 PM 7/8/2003
ARP Headbolts for GSR/TypeR/LSVTEC only torqued down ONCE $75obo LS VTEC Oil Line built my myself. has -6AN Stainless steel high pressure hose, BSPT Fittings on both ends to do it the RIGHT way. also has blocks to connect stock fuel presure switch and external oil pressure guage. $65 b20 block bought with 57 miles, put on 2200, now has ~2257 and a cracked sleeve. Will include crank, mains, bearings fitted to 0.15" on 1,2,4,5 and 0.0017" on 3, can check yourself with plastigauge or whatnot. Also includes Reworked (per ENDYN) oil pump, water pump, all NEW seals, even after I bought it, i replaced every seal. Never decked, entire block deburred on the outside and in. $400obo RC 310CC injectors for OBD1+ (Saturated?) will work on any car without a resistor box. $200obo Moroso Catch Can with 2 endyn block Breather Nipples, hose, and filter to go with it. Has minor ding in the bottom of it from removing the engine. $50 90-93 Integra California Car cover Storm Weave. Has a small hole from removing when frozen to the car (on the hood). Other than that its real clean and only used a few times. Fits like a dream. $75 Notice shiny tape covering minor tear...
Autometer Ultralight Oil pressure guage with a BRAND NEW Custom 6' stainless steel oil feed line instead of the hazardous nylon line. $50 b20b Throttle body with sensors only 57miles Best Offer b20 rods/rings/pistons with only 57 miles in perfect shape $50 b16a Intake Manifold and Throttle Body and fuel rail with Fuel pressure regulator $100 DOES NOT include injectors...
ADDED:
b18a Alternator and Starter
make offer
Modified by stizzit at 5:16 AM 6/16/2003
Modified by stizzit at 5:17 PM 7/8/2003
Thread Starter
Honda-Tech Member
Joined: Sep 2000
Posts: 1,176
Likes: 0
From: ATL
Re: LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ... (SLOW4drINTEG)
Bump.
I'd like to hold off for local buyers and try to ship the heavy parts only after I cannot sell them locally.
However, if you really want it I'll give it to ya for $550
shipped hehe
I'd like to hold off for local buyers and try to ship the heavy parts only after I cannot sell them locally.
However, if you really want it I'll give it to ya for $550
shipped hehe
Trending Topics
Honda-Tech Member
iTrader: (1)
Joined: Aug 2001
Posts: 4,180
Likes: 1
From: Funfax, VA, United States
Re: LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ... (stizzit)
Can i get a picture of the Autometer gauge + line... I might be interested
Thread Starter
Honda-Tech Member
Joined: Sep 2000
Posts: 1,176
Likes: 0
From: ATL
Re: LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ... (navin)
unfortunatly i don't have a picture of it (went home to take them, a 3 hour drive) so you'll have to take my word the SS line is brand new and has steel fittings on either end with a SS braided hose. The oil pressure guage is used still has bulb and has a little glue around the part that goes into the pillar that you can't see, other than that - guage is mint.
Joined: Mar 2002
Posts: 1,255
Likes: 0
From: chicago, il, usa
Re: LOTS of Aftermarket parts b16 Head, b20 Block, JDM ITR parts, Clutch/fly, etc ... (stizzit)
email me at faraj77@aol.com, i am ready to buy your tranny and block, i am in chicago il. thanks
