Hey Luders, sorry to bother but I need a website on clearing rear signals for 4th gen cars. I've searched for it for awhile and could only find clearing rear for 5th gen. Any help is appreciated...by the way how hard is it?
Thanks!

 

HPOA.org had a writeup but the link is bad apparently.
Whatever you do, don't do this...



i either have a crummy oven or a crummy tail, either way it sucks.

 

yeah..haha that's ugly

 

basically you put them in the oven at 275 (I plan to use 225 next time as i obviously had problems) for 3 or 4 minutes and then begin to slowly pry them apart very carefully. Once the adhesive begins to harden again, throw them back in for another minute or two. You can also use a heat gun to be safer. Sorry i don't have a link to an actual writeup.

 

Thank you for the advice.

 

http://forums.hpoa.org/index.p...0911b

i used a heat gun, i dont trust an oven.

 

i say leave your tail-lights alone.
OEM are the best looking out of all other tail-lights and mods i've seen.