FS: 94 Honda Accord F22b1 Turbo Charged
This car has been my pride and joy to work with. I have come to the point in my life where I need something that will be able to get me back and fourth to Washington DC every day, so i need to sell this piece of work.
Here is a list of modifications that have been done to the car:
ENGINE
>F22B1 SOHC VTEC
>Punched .004 over
>Arias 8.5 to 1 pistons
>Crower rods
>Total Seal rings
>Golden Eagle "Godzilla" sleeves
>KG Precision Engineering stage 5 head with SSI valves
>Custom made intake manifold
>Ported & Polished manifold and throttle plate
>JG Engine Dynamics 58mm throttle body
>Iceman exhaust manifold
>Turbonetics T3/T04E stage 3 : 50 trim turbo
>MHI intercooler
>Tial blow-off valve & 42mm wastegate
>Crane Hi-6 ignition
>Nology Pro-Fire coil & Hot-Wires
>NGK plugs
>MSD distributor cap
>2 7/8" custom downpipe and 3" exhaust with Tsudo muffler
>SX Engineering external pump, filter, Braided AN-8 stainless line from tank to front
>AN-6 stainless line to fuel rail
>AEM fuel rail
>AEM Tru Power Pullies
>Unorthedoux Racing Underdrive pullies
>Clutchmasters Stage 4 Clutch with lightened pully
>STR Dip Stick, Radiator Cap Cover, Clutch Cap Cover, Power Steering Cover
>Fluidyne Radiator
INTERIOR
>Factory toupe ( tanish grey color ) interior
>Corbeau Forza race seats with 5 point Straud Racing Harness
>Custom Made Chromoly Roll cage
>Carbon Fiber dash kit
>Carbon Fiber A-pillar pod
>Greddy Boost, EGT Gauge
>Auto Meter Air/Fuel Gauge
>GReddy turbo timer
>Apexi Super AVC-R Boost Controller
>Apexi VAFC
>Momo/Neuspeed shift ****
>Momo carbon fiber pedals
>Momo carbon fiber door sill plates
>Indaglo gauges
WHEELS/SUSPENSION
>17 x 7.5 Konig Toxxin wheels ( custom powdercoated )
>215/40-17 Yokohama AVS Intermediate tires
>Eibach/Koni front & Neuspeed/Koni rear suspension
>Power Stop rotors in front and in rear
>Goodrich stainless brake lines
>Energy Suspension Hiper-Flex bushing kit
>Energy Suspension motor mount
>Suspension Techniques anti-sway bars ( f & r )
>Neuspeed front strut bar
>OBX top rear strut bar & DC Sports rear lower tie bar
EXTERIOR
>JDM look head lights (for sale with trade)
>Clear markers
>Clear side markers
>Clear Corner lights
>Clear bumper lights
>Red/Clear tail lights
>5% tint rear, 20% front
This car has a ton of work done as you can see, so as long as this thing goes in good hands, i will be happy. The body of the car has 89,xxx miles on it. The whole motor, and turbo have only 5k on it.
I am asking 10,800/obo for this car. If you are seriously interested in it, please feel free to post, or email me for more information.
Pics of the car will be posted on the next post down. THanks for looking.
Here is a list of modifications that have been done to the car:
ENGINE
>F22B1 SOHC VTEC
>Punched .004 over
>Arias 8.5 to 1 pistons
>Crower rods
>Total Seal rings
>Golden Eagle "Godzilla" sleeves
>KG Precision Engineering stage 5 head with SSI valves
>Custom made intake manifold
>Ported & Polished manifold and throttle plate
>JG Engine Dynamics 58mm throttle body
>Iceman exhaust manifold
>Turbonetics T3/T04E stage 3 : 50 trim turbo
>MHI intercooler
>Tial blow-off valve & 42mm wastegate
>Crane Hi-6 ignition
>Nology Pro-Fire coil & Hot-Wires
>NGK plugs
>MSD distributor cap
>2 7/8" custom downpipe and 3" exhaust with Tsudo muffler
>SX Engineering external pump, filter, Braided AN-8 stainless line from tank to front
>AN-6 stainless line to fuel rail
>AEM fuel rail
>AEM Tru Power Pullies
>Unorthedoux Racing Underdrive pullies
>Clutchmasters Stage 4 Clutch with lightened pully
>STR Dip Stick, Radiator Cap Cover, Clutch Cap Cover, Power Steering Cover
>Fluidyne Radiator
INTERIOR
>Factory toupe ( tanish grey color ) interior
>Corbeau Forza race seats with 5 point Straud Racing Harness
>Custom Made Chromoly Roll cage
>Carbon Fiber dash kit
>Carbon Fiber A-pillar pod
>Greddy Boost, EGT Gauge
>Auto Meter Air/Fuel Gauge
>GReddy turbo timer
>Apexi Super AVC-R Boost Controller
>Apexi VAFC
>Momo/Neuspeed shift ****
>Momo carbon fiber pedals
>Momo carbon fiber door sill plates
>Indaglo gauges
WHEELS/SUSPENSION
>17 x 7.5 Konig Toxxin wheels ( custom powdercoated )
>215/40-17 Yokohama AVS Intermediate tires
>Eibach/Koni front & Neuspeed/Koni rear suspension
>Power Stop rotors in front and in rear
>Goodrich stainless brake lines
>Energy Suspension Hiper-Flex bushing kit
>Energy Suspension motor mount
>Suspension Techniques anti-sway bars ( f & r )
>Neuspeed front strut bar
>OBX top rear strut bar & DC Sports rear lower tie bar
EXTERIOR
>JDM look head lights (for sale with trade)
>Clear markers
>Clear side markers
>Clear Corner lights
>Clear bumper lights
>Red/Clear tail lights
>5% tint rear, 20% front
This car has a ton of work done as you can see, so as long as this thing goes in good hands, i will be happy. The body of the car has 89,xxx miles on it. The whole motor, and turbo have only 5k on it.
I am asking 10,800/obo for this car. If you are seriously interested in it, please feel free to post, or email me for more information.
Pics of the car will be posted on the next post down. THanks for looking.
Trending Topics
The car is not for sale as of this moment because i have run into problems with the motor. I will most likely be parting out the whole entirer car, or at least most of it here shortly.
Thread
Thread Starter
Forum
Replies
Last Post
hanginlow
Classifieds: Forced Induction
14
Mar 14, 2003 06:48 PM




