Extensively Ported LS head
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 1,180
Likes: 0
From: Markham, Ontario, Canada
Extensively Ported LS head
Its a B18A head extensively ported. lost the cam caps so I will take a huge loss on this head to sell it without cam caps. So if you have a set of cam caps, use them and get the cam journels linebored and you have a very well ported head ready to go. I have all of the stock valve train parts (ie: valves, springs and retainers). Spent close to $800 in porting so I will sell it for $300 U.S with no core exchange like most places do.
Took pics of a before and after on the exhaust side to show the difference
Same with the intake side
Heres a close up of the intake port
Same with the exhaust port
The intake and exhaust were gasket matched. Combustion cambers were left alone. The head work is all done, shots were for my purposes in the buildup stage. Valve guides are in good condition as well. This head is in stock form, never been shaved.
Modified by MIKES at 1:42 PM 4/17/2003
Took pics of a before and after on the exhaust side to show the difference
Same with the intake side
Heres a close up of the intake port
Same with the exhaust port
The intake and exhaust were gasket matched. Combustion cambers were left alone. The head work is all done, shots were for my purposes in the buildup stage. Valve guides are in good condition as well. This head is in stock form, never been shaved.
Modified by MIKES at 1:42 PM 4/17/2003
Thread
Thread Starter
Forum
Replies
Last Post
diesel1245
All Motor / Naturally Aspirated
17
Apr 24, 2007 03:50 PM