Revised skunk2 front camber kits
Thread Starter
Banned
Joined: Mar 2001
Posts: 2,637
Likes: 0
From: at last finally back to sweet home, sunny north cali, usa
Revised skunk2 front camber kits
FYI, after being backordered for a very long time, the revised front camber kits are finally back in...
The previous design was modified factory A Arms. These are new units which has revised slider angle for more shock tower clearence. The adjustment range is also a lot more previously about +/- 2 deg or so these should do +/- 5 deg. The slider is made of thicker strong steel vs. forged aluminum.
I have couple in stock for all DC/EG chassis. EK's are coming in later... Email me privately if interested. Thanks.
The previous design was modified factory A Arms. These are new units which has revised slider angle for more shock tower clearence. The adjustment range is also a lot more previously about +/- 2 deg or so these should do +/- 5 deg. The slider is made of thicker strong steel vs. forged aluminum.
I have couple in stock for all DC/EG chassis. EK's are coming in later... Email me privately if interested. Thanks.
New User
Joined: Jun 2001
Posts: 74
Likes: 0
From: Somerville, NJ, USA
Re: Revised skunk2 front camber kits (frank@b16a.com)
"These are new units which has revised slider angle for more shock tower clearence."
Why the change? Was there a problem with the older units wacking the upper part of the shock tower and punching holes in it?
Why the change? Was there a problem with the older units wacking the upper part of the shock tower and punching holes in it?
New User
Joined: Jun 2001
Posts: 74
Likes: 0
From: Somerville, NJ, USA
Re: Revised skunk2 front camber kits (frank@b16a.com)
"These are new units which has revised slider angle for more shock tower clearence."
Why the change? Was there a problem with the older units wacking the upper part of the shock tower and punching holes in it?
Why the change? Was there a problem with the older units wacking the upper part of the shock tower and punching holes in it?
Thread Starter
Banned
Joined: Mar 2001
Posts: 2,637
Likes: 0
From: at last finally back to sweet home, sunny north cali, usa
Re: Revised skunk2 front camber kits (LSIntegra94)
Yah, some people dump their cars to the ground and the A arm could come in contact with the shock towers. Over lowering is not good for handling...
Honda-Tech Member
Joined: Oct 2000
Posts: 4,490
Likes: 2
From: GTA, ON, Canada
Re: Revised skunk2 front camber kits (Scooby)
DA =90-3 integras
DC=2dr 94-01 integras
DB=4dr integras 94-01
EF=88-91 civic
EG=92-5 civic
EK=96-00 civic
and there is still the particular codes such as:
EG6=92-5 civic SiR
EK9=Civic Type R 97-00
EK4=96-00 Civic SIR
DA6=90-3 Integra XSi/RSi
...
DC=2dr 94-01 integras
DB=4dr integras 94-01
EF=88-91 civic
EG=92-5 civic
EK=96-00 civic
and there is still the particular codes such as:
EG6=92-5 civic SiR
EK9=Civic Type R 97-00
EK4=96-00 Civic SIR
DA6=90-3 Integra XSi/RSi
...
Thread
Thread Starter
Forum
Replies
Last Post
ghettoracer
Honda Civic / Del Sol (1992 - 2000)
1
Jun 27, 2001 03:24 AM
