what kind of header can i use on my ZC?

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2003 | 07:02 PM

sabertooth

Thread Starter

Joined: Apr 2003

Posts: 217

Likes: 0

From: chandler, az, usa

11.2 second zc crx

nah just kiddin i just wanted toget some1 to look at my post n reply, what header can i use on my zc and where can i get one

Apr 12, 2003 | 07:07 PM

photonjedi808

Junior Member

Joined: Sep 2001

Posts: 352

Likes: 0

From: hi, US

Re: 11.2 second zc crx (sabertooth)

that was just gay

do a search

Apr 12, 2003 | 07:09 PM

drjondurst

Joined: Sep 2002

Posts: 1,002

Likes: 0

Re: 11.2 second zc crx (sabertooth)

Ha I saw u post in my thread earlier..

You can use a CRX/Civic Si header but you'll have to port match the ports. The best match would be a 89 integra 4-2 peice and a CRX/Civic Si 2-1 peice.

Apr 12, 2003 | 09:50 PM

Full-Race Henry

Honda-Tech Member

Joined: Jan 2003

Posts: 2,865

Likes: 0

Re: 11.2 second zc crx (sabertooth)

Most people i know that run ZC's usually just use the 88-91 Si header. But a few people use the 92 civic 4-1 1 piece and notch the crossmember

Apr 12, 2003 | 10:18 PM

1990hondaHF

Honda-Tech Member

Joined: Jun 2002

Posts: 2,180

Likes: 0

From: melbourne, Fl

Re: 11.2 second zc crx (EF8_Fan)

I used a 88-91 Si header and a grinder. The ports on the ZC are a bit larger then the SI's. No need to take it to a shop, you can do it yourself. It took me about 10-20 minutes...and I took my time.