Pics: kg/mm DR Race (DC2R-spec) on Integra w/ Neuspeed Koni Yellows (for cr00k)
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Pics: kg/mm DR Race (DC2R-spec) on Integra w/ Neuspeed Koni Yellows (for cr00k)
For anybody that cares.
Rear perch is up a notch (~.25")
Front is on stock height perch
Rear perch is up a notch (~.25")
Front is on stock height perch
Junior Member
Joined: Mar 2002
Posts: 693
Likes: 0
From: Columbus, OH, USA
Re: Pics: kg/mm DR Race (IN VTEC)
i care, it's clean, nice drop 
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
^^ missing the bumper lense or went to the track today?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>^^ missing the bumper lense or went to the track today?
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Re: Pics: kg/mm DR Race (cr00klyn718)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cr00klyn718 »</TD></TR><TR><TD CLASS="quote">thanks alot meng...how much was the gap front and back?
</TD></TR></TABLE>That would lead me to the next set of pics.
Mine
Friend's ITR
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Re: Pics: kg/mm DR Race (cr00klyn718)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cr00klyn718 »</TD></TR><TR><TD CLASS="quote">i like the drop alot...the back was perched up alil right...</TD></TR></TABLE>
Yes
Yes
Member
Joined: Sep 2001
Posts: 1,650
Likes: 0
From: Chicago, USA
Re: Pics: kg/mm DR Race (MachAF)
nope... i'm not quite sure what kind of exhaust it is. not too fond of the tip.
drop, however, looks good. glad people arent saying "slizZam thAt y0!"
dropping for handling
dropping for looks
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MachAF »</TD></TR><TR><TD CLASS="quote">Is that Mugen exhaust?</TD></TR></TABLE>
drop, however, looks good. glad people arent saying "slizZam thAt y0!"
dropping for handling
dropping for looks
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MachAF »</TD></TR><TR><TD CLASS="quote">Is that Mugen exhaust?</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Re: Pics: kg/mm DR Race (ajchen)
After slapping the springs on, the car looked way too low to me b/c it was too low for my preference. Even when I had the ITR springs and Neuspeed Koni Yellows, the car never sat lower than 3 fingers in the well. So, I only drove the car with those springs for about a week and 300 some odd miles.
I've had the springs off the car for quite a while now. With those springs and the JDM DC header, I know I would have already banged it up.
They're just laying on the floor right now.
I won't be using them anymore b/c I have these instead.
The exhaust is some Mugen Twin-loop imitation from Top Speed in Dallas. Loud exhausts get on my nerves and I didn't wanna spend twice what I go that exhaust for a genuine Mugen axle-back. I do wanna switch it out for a real one later on b/c sometimes I feel like the muffler sits too far away from the rear bumper.
I've had the springs off the car for quite a while now. With those springs and the JDM DC header, I know I would have already banged it up.
They're just laying on the floor right now.
I won't be using them anymore b/c I have these instead.
The exhaust is some Mugen Twin-loop imitation from Top Speed in Dallas. Loud exhausts get on my nerves and I didn't wanna spend twice what I go that exhaust for a genuine Mugen axle-back. I do wanna switch it out for a real one later on b/c sometimes I feel like the muffler sits too far away from the rear bumper.
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Re: Pics: kg/mm DR Race (FrostyDC4)
kg/mm DR Racing - DC2R
front 8.2 to 3.6 kg/mm 201 to 458 lb/in -1.38" -35 mm
rear 2.4 to 6.4 kg/mm 134 to 357 lb/in -1.18" -30 mm
front 8.2 to 3.6 kg/mm 201 to 458 lb/in -1.38" -35 mm
rear 2.4 to 6.4 kg/mm 134 to 357 lb/in -1.18" -30 mm
Thread
Thread Starter
Forum
Replies
Last Post
reno96teg
Honda / Acura
7
Jan 12, 2006 09:18 AM
