Ok i posted here a while back asking questions regarding my mini me swap.
engine is d16y7 block(97dx), d16y8 head(98ex), have a 98 ex ecu, and the car is an automatic
i had used the EX harness the guy i bought my head and IM off of but something f'd up on it(long story, short version, took car out, car was revving from 0 to 6k and back and forth real quick while i was driving, sputtering and coming close to stalling, was something electrical) so i replaced the EX harness with my DX harness. I then took the vtec wires from the ex harness(cut it apart so it still had the plugs on the end of the wires so i wouldnt have to solder them) but where do i run them too?

anyone have a diagram or can help me out?
like which color wire goes to which spot on the plug?
how many wires total will i have to run to the ecu?

someone posted pics up in another thread but someone here posted pics i had printed out a while back but i lost the papers and can't find it on the site anymore

thanks so much
i can answer any questions, i just wanna get my car running fine

 

your asking where you run the vtec wires too? if so you need something like a vtec controller or rmp switch.