Ive made up my mind Im gonna go with L.A's. I need to buy the sleeves so I can have them installed here in town. Ive tried searching it but cant get anything "LA" to come up. Just let me know if you guys know where to buy em..
thanks

 

contact earl

 

earl.....earl??

 

the moderator of this forum

 

o ok good deal ..thanks

 

well if it's for your prelude then there a guy on here named wutang been who's doing a gb for about 100 bucks for all 4!!!

 

Earl or my self can get the LA sleeves for you. I can come no where near 100 bucks for sleeves. Thats insane!!!! give me a im or Earl a im for assistance.

 

Did you need jut the sleeves itself..?? i have LA sleeves in stock also have access to DARTON and GE sleeves....you can contact me or sparkracinginc on this board..ROCKET on this board also sells LA sleeves..

 

The $100 sleeves are just stock replacement sleeves, not made for boost or strength. Just for replacement in a stock block.

We sell B series sleeves for $290 a set. These sleeves are already side cut for proper installation. Be careful you don't buy sleeves that are not cut yet. The two middle sleeves are cut on both sides and the end ones are cut on one side. They are made from the same material as Darton. The sleeves cannot be bought from LA Sleeve in quantities of less than 100-200.

 

LA sleeves.............i've never heard of them??????

 

BTW, we do sell H series sleeves made by Darton. You can get open or closed deck. They are $350 a set.They are the biggest sleeve maker around. They make sleeves for the aftermarket.

 

Hmmmmmm, intresting. I wish I knew of them two years ago. For 300 or so bucks for a set of sleeves then get them installed......that would have been cost effecient for me. How are they compared to Golden Eagle?

 

In my opinion, they install much easier than GE. In fact I would say only GE should install GE sleeves. LA, Darton and Benson are made of a harder material than GE's sleeves. To me that seems better but maybe Vince has his reason for the softer material. It could work better for his style of sleeve.

 

damnit i wish i could just find some nice sleeves for my block so i can get my car(+NEW garret t3 60-1) back on the road. Its all i have left to due...

 

my benson sleeves hold up awesome

 

so do our...

 

benson? ive heard of em but never seen em. They kinda like GE?

 

Hey Earl, do they make any D series sleeves?

 

INSPYRAL,
D series sleeves are available.
In April, we should be releasing our Exospeed Sleeves for the B, H, and D series.

Wil

 

well i just checked and the ones wutangben is offering are la sleeves. they are chromoly iron sleeves which are built to handle boost. also this is pretty much dealer pricing, he's not making any money off of it. but its only for the h-series.


[Modified by flip1199, 11:38 PM 3/18/2003]

 

they are an open deck design and look like the RS stuff. We run them with an O-ring and have good luck this way.

 

How much do the D series sleeves run?

 

Man i told you man to just PM earl he has them hehe you made a whole post about this for nothing hehehe j/k.So who makes RS machine sleeves?

 

man he said that he can only get them for a open deck h series

 

I DO sell Darton closed deck sleeves for the H at $350