B18b in a 90-93 Integra...need some help figuring it out
Thread Starter
Junior Member
Joined: Jul 2001
Posts: 772
Likes: 0
From: San Diego, ca, usa
B18b in a 90-93 Integra...need some help figuring it out
I tried searching and came up empty handed...so here we go, i know someone's done this:
I have a 91 integra that I am replacing the motor with a longblock from a 94. I want to use the cars stock wiring harness. I noticed a couple of different sensors on the back side of the two blocks.
I was just hoping someone has done this swap before and can explain if all I need to do is add one of the sensors and lengthen the wire for the ECT to go to the thermostat housing as it is on a 94.
Any help is much appreciated..thanks fellas.
I have a 91 integra that I am replacing the motor with a longblock from a 94. I want to use the cars stock wiring harness. I noticed a couple of different sensors on the back side of the two blocks.
I was just hoping someone has done this swap before and can explain if all I need to do is add one of the sensors and lengthen the wire for the ECT to go to the thermostat housing as it is on a 94.
Any help is much appreciated..thanks fellas.
